Page 4 of 5

Re: satTv and mos3

PostPosted: 28 Jan 2012, 19:35
by john3voltas
Should this module only work from connecting O!Play to a Dreambox?
Or can this be used for any SAT receiver?
I am looking for something to connect my O!play to tvheadend.
I would run tvheadend on a separate server and I would access to it's DVB-S/DVB-T channels using O!Play.
Any ideas?

Re: satTv and mos3

PostPosted: 08 Feb 2012, 23:57
by Blackvoske
Let's see if i got this correct.
With the asus o'play (R1?) i can connect to my dreambox and watch tv.... correct ?

Re: satTv and mos3

PostPosted: 13 Feb 2012, 18:55
by tropheuz
Hi,
we would say Yes :)
I have a hdp-r1 and DM500 (enigma1) and could stream content from DM500 to asus.

Farvoice,
can you give a plugin for enigma1 devices? :)

regards

Re: satTv and mos3

PostPosted: 13 Feb 2012, 19:38
by Blackvoske
Hmm...sounds like fun :-)
Is that easy to do ?
I've got an enigma 2, dm800 se.

Re: satTv and mos3

PostPosted: 13 Feb 2012, 21:19
by tropheuz
Hi,
very easy ... all I had to do was create a channel and put in the URL: http://dreambox_ip:stream_port/

this will give you a stream of whatever you have selected in dreambox. What would be great was if we could setup all channels and changed them with the asus remote

for what I understood this is possible for enigma2 devices i think.

Re: satTv and mos3

PostPosted: 20 Feb 2012, 15:58
by kayetano
I modified the module dbe2 for enigma2 to work with enigma1, but due to time constraints I could not finish it.
The basic functions work, but is unstable.
If you are interested let me know and I send you.
I do not give support.

Re: satTv and mos3

PostPosted: 20 Feb 2012, 16:44
by tropheuz
Hi Kayetano,
That would would be great! Can you please send it to me?

Thank you again
Regards

Re: satTv and mos3

PostPosted: 26 Feb 2012, 18:58
by kayetano
This is the module
To install "pm install dbe1 alone"
You must change the ip in "/usr/share/mos/www/modules/dbe1/dbe1.config.php"

Re: satTv and mos3

PostPosted: 15 May 2012, 01:26
by dft601
Great Work

With the "patches" it works !

Now I am also on AMP (r8) and got it to work again.

The only thing I recognized:

On Asus Firmware I could use the "Pause" button for a fews seconds and there was an "automatic buffer". The stream worked perfectly.

On AMP I cannot use "Pause" So my stream is sometimes with stutter...

Any idea to get a 3 to 5s stream - buffer ?

Mike

Re: satTv and mos3

PostPosted: 15 May 2012, 12:53
by FarVoice
dft601 wrote:Great Work

With the "patches" it works !

Now I am also on AMP (r8) and got it to work again.

The only thing I recognized:

On Asus Firmware I could use the "Pause" button for a fews seconds and there was an "automatic buffer". The stream worked perfectly.

On AMP I cannot use "Pause" So my stream is sometimes with stutter...

Any idea to get a 3 to 5s stream - buffer ?

Mike

try to define a PAUSE command to any button in irfake config