Firmware HD2 1.12.06 rev3.2

[przemo_111]

Same problem with Polish language. Selecting it restarts O!Play

[Olegin]

To FoGyuri, mitica_1959, przemo_111
You must do next steps:
1. copy by ftp files English.str and National_language.str from players dir: /usr/local/bin/Resource to you computer
2. install akelpad text editor (english version)
3. edit file National_language.str - text in string 1 in english file must be equal to translated text in national language file, string 2 eng = string 2 nat.... last string eng = last string nat, file must be in UTF-8
4. if you install bin FW give next commands in the telnet:

Code: Select all

stopall
umount /etc
mount -o remount rw /

5. copy by ftp National_language.str from your computer to /usr/local/bin/Resource in your player and then reboot your player and choose your language in setup
6. if you install plus FW or if you can't do steps 4,5 - do next step
7. send to us your edited file, we'll implement it to the next FW rev.

[Jeremy C]

Seems to be working great here on my R1, but could you tell me where the video settings are located? there doesn't seem to be a brightness adjustment available under the setup/video tab.

Edit: whops never mind I found it under "video setup: off"

[przemo_111]

Working POLISH.str
http://dl.dropbox.com/u/1503359/POLISH.str

[Pollux]

Thanks a lot for bringing us the 1.12.06r2! Works great on my HD-R3 with so many improvements
taken care of. Thanks to everybody who contributed!

However, I am still having some problems with the built-in WiFi in the R3.
After switching off & switching on again with the RC, I cannot reconnect the WiFi
to the access point. Only thing that helps is to disconnect the power and let the HD-R3
boot again.
I also noticed that when doing a "reboot" on the telnet command line the WiFi gets
activated correctly as expected. Switching on by RC seems not to do a full reboot.

Has anybody solved this problem so far?
I could imagine that a script in the wakeup.d folder could help, but have no idea which
command needs to be executed to reset the WiFi module.

Any help will be appreciated!
Rgds.

[dadashi]

How do I delete files from the file manager menu? Which button on the remote brings the pop up menu for delete?

With the normal HD-R3 firmware I choose the file and press the left button and the delete menu pops up, with the HD2 1.12.06 rev2 it goes to the menu bar on the left and there is no way to delete files...

[Jeremy C]

How do I delete files from the file manager menu? Which button on the remote brings the pop up menu for delete?

I haven't figured that one out either. It would be great if the old XBMC feature of asking you at the end of the video if you want to delete could be added

[Olegin]

How do I delete files from the file manager menu? Which button on the remote brings the pop up menu for delete?

"Mode" button R3 RC = "File" button HD2 - they call pop up menu to delete, copy, rename...

[dadashi]

How do I delete files from the file manager menu? Which button on the remote brings the pop up menu for delete?

"Mode" button R3 RC = "File" button HD2 - they call pop up menu to delete, copy, rename...

I've already tried that but it doesn't work...

[Jarre]

yes it should be that button, but i also tried with no luck..