Upgrade bootcode

Re: Upgrade bootcode

Postby FearlessNV » 24 May 2016, 21:40

Hi,

I cannot complete the unbrick process;
what did I do wrong?
Image
a tftp test transfer via prompt was successful
FearlessNV
 
Posts: 2
Joined: 24 May 2016, 21:19

Re: Upgrade bootcode

Postby FearlessNV » 05 Jun 2016, 22:44

Hi again,

I post this to explain:

The problem with tftp was that the player was not connected to network.

The next problem came with the rescue, that not reconogized my devices. Once other rescue was installed, firmware can be flashed.

Many thanks to FarVoice for support.

Cheers
FearlessNV
 
Posts: 2
Joined: 24 May 2016, 21:19

Re: Upgrade bootcode

Postby iwsbarker » 03 Jan 2017, 10:35

I have an O!Play with bootcode 17 that I tried to update to bootcode 23 using the telnet method, and it's turned into a brick (I have 2 others that I though I upgraded this way, but perhaps I used a different method). I have found a USB/TTL cable locally that provides 5V VCC, 3.3V TX/RX, and GND (https://solarbotics.com/product/14072/). Will this cable work, and does VCC even need to be connected? Thank you.
ASUS O!Play R1 (amp_r11_icon_4)
iwsbarker
 
Posts: 9
Joined: 21 Jun 2016, 23:21

Re: Upgrade bootcode

Postby FarVoice » 03 Jan 2017, 13:44

Right cable, but you must connect Rx Tx and GDN. If you connect VCC, cable's controller get power from player and you will lost first symbols, when player goes on.
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: Upgrade bootcode

Postby iwsbarker » 04 Jan 2017, 23:54

I followed the steps in the first post in this topic, and got as far as the O!Play saying "Preparing for update. It takes a few seconds." It's been sitting there for 10 minutes or so. How long should this step take? On the USB stick, I've got the install.img file from the HDP_R3_FW_121PAL_BOOTCODE_23.zip provided by FarVoice.
ASUS O!Play R1 (amp_r11_icon_4)
iwsbarker
 
Posts: 9
Joined: 21 Jun 2016, 23:21

Re: Upgrade bootcode

Postby Pokrass » 05 Jan 2017, 00:12

You must install firmware after updating bootcode. Read FAQ and inatall recomended firmware and gui.
IconBIT HDS7L Fw: AMP_r12 GUI: VRT
iNeXT HD1 W Fw: X3D_Series_V4.0.2b160406
User avatar
Pokrass
 
Posts: 3154
Joined: 18 Mar 2012, 04:18
Location: Плюк. Планета № 215 в Тентуре галактики "Кин-дза-дза" в Спирали.

Re: Upgrade bootcode

Postby iwsbarker » 05 Jan 2017, 01:26

I've tried the HDP_R3_FW_121PAL_BOOTCODE_23 firmware, and the amp_r13_nogui firmware, but the o!play never gets past the "Preparing for update. It takes a few seconds." screen. Is there another firmware I should be trying? Or another method to try flashing the firmware, other than using install.img on a USB stick plugged in to the O!Play?
ASUS O!Play R1 (amp_r11_icon_4)
iwsbarker
 
Posts: 9
Joined: 21 Jun 2016, 23:21

Re: Upgrade bootcode

Postby iwsbarker » 05 Jan 2017, 01:29

I've attached the console log for my latest attempt. There are a number of USB errors, but I know the USB stick works fine, as it worked fine in my PC when copying the install.img file to it.
Attachments
screenlog.zip
(3.97 KiB) Downloaded 364 times
ASUS O!Play R1 (amp_r11_icon_4)
iwsbarker
 
Posts: 9
Joined: 21 Jun 2016, 23:21

Re: Upgrade bootcode

Postby iwsbarker » 05 Jan 2017, 03:16

I was looking at the component labelling on the board, and I noticed that the eSata port was also labelled USB0. I tried that port, and the firmware successfully installed. On my other o!plays, I was sure I used the USB port, but perhaps I was remembering incorrectly. In any case, I'm up and running now!
ASUS O!Play R1 (amp_r11_icon_4)
iwsbarker
 
Posts: 9
Joined: 21 Jun 2016, 23:21

Re: Upgrade bootcode

Postby FarVoice » 05 Jan 2017, 09:22

Сombined USB-eSATA port is connected to the chip directly, unlike to the second port, which is connected through a USB hub. Maybe your USB hub is dead. Is a frequent failure.
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

PreviousNext

Return to About Asus O!Play

Who is online

Users browsing this forum: No registered users and 8 guests

cron