Upgrade bootcode

Re: Upgrade bootcode

Postby Pokrass » 27 Dec 2012, 17:29

вся надежда на Вас ;-)
IconBIT HDS7L Fw: AMP_r12 GUI: VRT
iNeXT HD1 W Fw: X3D_Series_V4.0.2b160406
User avatar
Pokrass
 
Posts: 3120
Joined: 18 Mar 2012, 04:18
Location: Плюк. Планета № 215 в Тентуре галактики "Кин-дза-дза" в Спирали.

Re: Upgrade bootcode

Postby Virtual » 27 Dec 2012, 17:47

Pokrass wrote:вся надежда на Вас ;-)

ждем логов с консоли.... надеюсь буткод жив.

PS главное ни в коем случа не пробовать заливать буткод из этой темы!!! (и других подобных) ибо другое поколение чипа!


En:
waiting logs of console... I hope bootcode is alive.

PS. Important! Don't try to flash bootcode from this thread (or another same threads) because its another generation of chipsets!
марсы: HDS7 (смотрелка AMP скин vrt уже без вариантов)
HDR12 AMP (обычно сервер с RAM 256 и возможностью подключить 2 SATA диска 2T+)
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.84 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6374
Joined: 01 Oct 2010, 17:17
Location: UFA RU

Re: Upgrade bootcode

Postby Kacperbuli » 27 Dec 2012, 19:22

Which bootcode would be good to load to Measy E8HDL?
Measy E8HDL. It is bricked, after power on only blue light, nothing else happens.
Probably after wrong flash.
Kacperbuli
 
Posts: 6
Joined: 26 Dec 2012, 14:38

Re: Upgrade bootcode

Postby Pokrass » 27 Dec 2012, 19:23

In first connect console and give log!
IconBIT HDS7L Fw: AMP_r12 GUI: VRT
iNeXT HD1 W Fw: X3D_Series_V4.0.2b160406
User avatar
Pokrass
 
Posts: 3120
Joined: 18 Mar 2012, 04:18
Location: Плюк. Планета № 215 в Тентуре галактики "Кин-дза-дза" в Спирали.

Re: Upgrade bootcode

Postby Kacperbuli » 28 Dec 2012, 00:36

I`ve ordered serial cabel and waiting for it. As soon as I get it I will try to do that.
Measy E8HDL. It is bricked, after power on only blue light, nothing else happens.
Probably after wrong flash.
Kacperbuli
 
Posts: 6
Joined: 26 Dec 2012, 14:38

Re: Upgrade bootcode

Postby Kacperbuli » 30 Dec 2012, 16:37

Hi!
Could someone of you could help me to identify Rx and Tx pins?

Best regards.
Measy E8HDL. It is bricked, after power on only blue light, nothing else happens.
Probably after wrong flash.
Kacperbuli
 
Posts: 6
Joined: 26 Dec 2012, 14:38

Re: Upgrade bootcode

Postby Pokrass » 30 Dec 2012, 16:41

turn on console, connect grnd, pwr and try connect rx and tx in each pin. When you will see "normally" log in console - you connect wright!
IconBIT HDS7L Fw: AMP_r12 GUI: VRT
iNeXT HD1 W Fw: X3D_Series_V4.0.2b160406
User avatar
Pokrass
 
Posts: 3120
Joined: 18 Mar 2012, 04:18
Location: Плюк. Планета № 215 в Тентуре галактики "Кин-дза-дза" в Спирали.

Re: Upgrade bootcode

Postby Kacperbuli » 30 Dec 2012, 18:36

Very sorry for bothering again. It loks like my box is completly dead. When I measure voltages on each pin I get below results:

1. 11,87V
2. 12.02V
3. 0V
4. 0,9V
5. 3,14V
I understand that pin 3 is grnd. But which one is pwr?
Measy E8HDL. It is bricked, after power on only blue light, nothing else happens.
Probably after wrong flash.
Kacperbuli
 
Posts: 6
Joined: 26 Dec 2012, 14:38

Re: Upgrade bootcode

Postby john21murdoc » 15 Nov 2013, 09:42

NEED HELP FARVOICE!!! (or anybody who knows how to fix this)

i tried everything here,it did fixed my oplay hd2. but the problem is when i unplug my oplay from the power source after i unbrick it(meaning, after it returns to normal), it returns to the "PREPARING FOR UPDATE. IT TAKES A FEW SECONDS" screen.i've tried doing the unbrick process several times and it's still the same after i unplug the power source.it works okay if i turn it off through remote but as what i've said as long as i don't unplug the power source it's running smoothly. any idea? i used the latest on asus website for firmware and the one's you provided here but same result happens
john21murdoc
 
Posts: 1
Joined: 15 Nov 2013, 09:33

Re: Upgrade bootcode

Postby FarVoice » 15 Nov 2013, 14:22

@john21murdoc
Show console log of flashing process, startup after flashing and cold startup (when you plug power cord)
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8573
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

PreviousNext

Return to About Asus O!Play

Who is online

Users browsing this forum: No registered users and 1 guest