moServices

вся надежда на Вас

Pokrass wrote:вся надежда на Вас

ждем логов с консоли.... надеюсь буткод жив.

PS главное ни в коем случа не пробовать заливать буткод из этой темы!!! (и других подобных) ибо другое поколение чипа!


En:
waiting logs of console... I hope bootcode is alive.

PS. Important! Don't try to flash bootcode from this thread (or another same threads) because its another generation of chipsets!

Which bootcode would be good to load to Measy E8HDL?

In first connect console and give log!

I`ve ordered serial cabel and waiting for it. As soon as I get it I will try to do that.

Hi!
Could someone of you could help me to identify Rx and Tx pins?

Best regards.

turn on console, connect grnd, pwr and try connect rx and tx in each pin. When you will see "normally" log in console - you connect wright!

Very sorry for bothering again. It loks like my box is completly dead. When I measure voltages on each pin I get below results:

1. 11,87V
2. 12.02V
3. 0V
4. 0,9V
5. 3,14V
I understand that pin 3 is grnd. But which one is pwr?

NEED HELP FARVOICE!!! (or anybody who knows how to fix this)

i tried everything here,it did fixed my oplay hd2. but the problem is when i unplug my oplay from the power source after i unbrick it(meaning, after it returns to normal), it returns to the "PREPARING FOR UPDATE. IT TAKES A FEW SECONDS" screen.i've tried doing the unbrick process several times and it's still the same after i unplug the power source.it works okay if i turn it off through remote but as what i've said as long as i don't unplug the power source it's running smoothly. any idea? i used the latest on asus website for firmware and the one's you provided here but same result happens

@john21murdoc
Show console log of flashing process, startup after flashing and cold startup (when you plug power cord)