Hi there.
I have a raidsonic icybox mp305 much similar to emtec n200 and asus oplay (same chiptec).
Tried to flash my icybox with the latest firmware available on the vendor website and it bricked my box. It can't boot from usb, tried alot of times to restore fw from usb-disk or sd-card holding down power button method and no go.
After that, I tried to access box by telnet like described in many websites but no success too, so opened my box and connected RS232 usb to serial cable directly to the PCB, I can now access the box with putty by serial connection, I see that my box is booting to a kernel rescue partition and it doesn't detect any usb-device (that's the reason why it should not be able to restore fw with the hold power button method), with this rescue boot there's no ethernet access too so I cannot transfer firmware by network.
Anyone here already recovered from this?
Thanks alot.