hds42l to Seagate GoflexTV

Re: xds42l to Seagate GoflexTV

Postby il76x » 17 Jul 2013, 14:47

Лог | +
Freeing prom memory: 0kb freed
Reclaim bootloader memory from 80020000 to 80100000
Freeing unused kernel memory: 144k freed
RTK rtc can work.
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: restored from checkpoint
x_io: no version for "struct_module" found: kernel tainted.
x_io mod (C)Virtual, ver:1.0.0.3.
Old VenusIR driver found at 804b3b78
Found venus_ir_cleanup_module() @ 0x80108c8c
venus_ir_cleanup_module() called
New Venus IR driver loaded
set corepath: /tmp/hdd/volumes/HDD1/
sata_mars: Unknown symbol ata_scsi_ioctl
sata_mars: Unknown symbol mars_ata_busy_sleep
sata_mars: Unknown symbol ata_std_bios_param
sata_mars: Unknown symbol ata_tf_read
sata_mars: Unknown symbol ata_tf_load
sata_mars: Unknown symbol ata_altstatus
sata_mars: Unknown symbol ata_qc_free
sata_mars: Unknown symbol ata_exec_command
sata_mars: Unknown symbol ata_scsi_release
sata_mars: Unknown symbol ata_qc_issue_prot
sata_mars: Unknown symbol ata_bus_reset
sata_mars: Unknown symbol ata_port_probe
sata_mars: Unknown symbol ata_interrupt
sata_mars: Unknown symbol MARS_CP_EN
sata_mars: Unknown symbol ata_bus_probe
sata_mars: Unknown symbol ata_scsi_slave_config
sata_mars: Unknown symbol ata_qc_new_init
sata_mars: Unknown symbol ata_std_dev_select
sata_mars: Unknown symbol ata_scsi_error
sata_mars: Unknown symbol ata_port_disable
sata_mars: Unknown symbol ata_probe_ent_alloc
sata_mars: Unknown symbol ata_scsi_queuecmd
sata_mars: Unknown symbol ata_qc_issue
sata_mars: Unknown symbol mars_qc_complete_noop
sata_mars: Unknown symbol ata_eng_timeout
sata_mars: Unknown symbol ata_port_stop
sata_mars: Unknown symbol CP_KEY
sata_mars: Unknown symbol ata_qc_prep
sata_mars: Unknown symbol ata_host_stop
sata_mars: Unknown symbol ata_device_add
sata_mars: Unknown symbol ata_port_start
libata version 1.12 loaded.
sata driver initial...2009/12/30 14:50
mars_init_sata(1255)dev_addr:c00834f0
ata_device_add(4893)probe begin
scsi0 : SATA_DRV
sata dma reset
sata1: reset phy again!
sata phy reset
***128MB version...
Memory address 0x40000000
try_to_free_pages: free 851
+++ ALLOC index: 20480 order: 8
1. start remap DVR zone 87000000(80614000) 256...
map_done is 0...
try_to_free_pages: free 837
+++ ALLOC index: 20992 order: 9
1. start remap DVR zone 87200000(80618000) 512...
map_done is 0...
try_to_free_pages: free 891
sata1: reset phy again!
sata phy reset
+++ ALLOC index: 20736 order: 7
1. start remap DVR zone 87100000(80616000) 128...
map_done is 0...
try_to_free_pages: free 573
+++ ALLOC index: 21504 order: 8
1. start remap DVR zone 87400000(8061c000) 256...
map_done is 0...
try_to_free_pages: free 927
+++ ALLOC index: 21760 order: 8
1. start remap DVR zone 87500000(8061e000) 256...
map_done is 0...
try_to_free_pages: free 770
+++ ALLOC index: 22528 order: 11
1. start remap DVR zone 87800000(80624000) 2048...
map_done is 0...
save exit: isCheckpointed 1
[I2C0] i2c speed changed to 50 KHz
[I2C0] i2c speed changed to 50 KHz
try_to_free_pages: free 852
+++ ALLOC index: 16384 order: 12
1. start remap DVR zone 86000000(805f4000) 4096...
map_done is 0...
try_to_free_pages: free 890
+++ ALLOC index: 12288 order: 10
1. start remap DVR zone 85000000(805d4000) 1024...
map_done is 0...
try_to_free_pages: free 864
+++ ALLOC index: 20864 order: 3
1. start remap DVR zone 87180000(80617000) 8...
map_done is 0...
try_to_free_pages: free 206
+++ ALLOC index: 8192 order: 12
1. start remap DVR zone 84000000(805b4000) 4096...
map_done is 0...
try_to_free_pages: free 0
+++ ALLOC index: 4096 order: 12
1. start remap DVR zone 83000000(80594000) 4096...
map_done is 737...
sata1: reset phy extra!
sata phy reset
This is the current time: PowerUP_Done!!!
sata1: reset phy extra!
sata phy reset
[usb_param] setting for mars
Setting for MARS-B
[usb_param] set port two for host!
[usb1_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit
[usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
[usb2_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit
[usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
ehci_hcd ehci_hcd: EHCI Host Controller
ehci_hcd ehci_hcd: new USB bus registered, assigned bus number 1
ehci_hcd ehci_hcd: irq 2, io mem 0xb8013000
ehci_hcd ehci_hcd: park 0
ehci_hcd ehci_hcd: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub : individual port power switching
hub : individual port over-current protection
[cfyeh] set PPE = 0
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[usb_param] setting for mars
Setting for MARS-B
[usb_param] set port two for host!
[usb1_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit
[usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
[usb2_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit
[usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
usb 1-2: new high speed USB device using ehci_hcd and address 2
[usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
ohci_hcd ohci_hcd: OHCI Host Controller
ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2
ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
hub : individual port power switching
hub : individual port over-current protection
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub : no power switching (usb 1.0)
hub : no over-current protection
usb 1-2.1: new high speed USB device using ehci_hcd and address 3
###################################################################
[cfyeh-test] usb_set_configuration(1454)
Don't support this usb device or don't insert correct module yet!!!
bus_id 1-2.1:1.0 (config #1, interface 0)
###################################################################
sata1: reset phy extra!
sata phy reset
sata1: phy reset timeout!
sata1: no device found (phy stat 00000000)
sata1: ata_bus_probe failed
scsi1 : SATA_DRV
sata dma reset
sata2: reset phy again!
sata phy reset
sata2: reset phy again!
sata phy reset
sata2: phy reset timeout!
sata2: no device found (phy stat 00000000)
sata2: ata_bus_probe failed
try_to_free_pages: free 793
+++ ALLOC index: 22016 order: 7
1. start remap DVR zone 87600000(80620000) 128...
map_done is 118...
--- FREE index: 22016 order: 7
usb 1-2.2: new high speed USB device using ehci_hcd and address 4
###################################################################
[cfyeh-test] usb_set_configuration(1454)
Don't support this usb device or don't insert correct module yet!!!
bus_id 1-2.2:1.0 (config #1, interface 0)
###################################################################
usb 1-2.2: USB disconnect, address 4
usb 1-2.2: new high speed USB device using ehci_hcd and address 5
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DataTraveler 2.0 Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 4030464 512-byte hdwr sectors (2064 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 4030464 512-byte hdwr sectors (2064 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
/dev/scsi/host2/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
usb-storage: device scan complete
ufsd_lbd: module license 'Commercial product' taints kernel.
ufsd: driver 8.1 (018_A) LBD=ON with ioctl loaded at c016f000
NTFS read/write support included
Hfs+/HfsX read/write support included
save exit: isCheckpointed 1
try_to_free_pages: free 826
+++ ALLOC index: 13312 order: 10
1. start remap DVR zone 85400000(805dc000) 1024...
map_done is 971...
--- FREE index: 13312 order: 10
save exit: isCheckpointed 1
try_to_free_pages: free 815
+++ ALLOC index: 22016 order: 9
1. start remap DVR zone 87600000(80620000) 512...
2. redo mapping pages 1...
map_done is 462...
retry remapping...
1. start remap DVR zone 87600000(80620000) 512...
map_done is 1...
try_to_free_pages: free 815
+++ ALLOC index: 13312 order: 9
1. start remap DVR zone 85400000(805dc000) 512...
map_done is 0...
--- FREE index: 22016 order: 9
--- FREE index: 13312 order: 9
try_to_free_pages: free 636
+++ ALLOC index: 22016 order: 8
1. start remap DVR zone 87600000(80620000) 256...
map_done is 0...
--- FREE index: 22016 order: 8
try_to_free_pages: free 784
+++ ALLOC index: 13312 order: 10
1. start remap DVR zone 85400000(805dc000) 1024...
map_done is 0...
--- FREE index: 13312 order: 10
try_to_free_pages: free 361
+++ ALLOC index: 22016 order: 8
1. start remap DVR zone 87600000(80620000) 256...
map_done is 0...
try_to_free_pages: free 0
+++ ALLOC index: 13312 order: 9
1. start remap DVR zone 85400000(805dc000) 512...
map_done is 0...
try_to_free_pages: free 41
+++ ALLOC index: 13824 order: 9
1. start remap DVR zone 85600000(805e0000) 512...
map_done is 0...
--- FREE index: 13312 order: 9
--- FREE index: 13824 order: 9
--- FREE index: 22016 order: 8
try_to_free_pages: free 234
+++ ALLOC index: 13312 order: 10
1. start remap DVR zone 85400000(805dc000) 1024...
map_done is 0...
--- FREE index: 13312 order: 10
try_to_free_pages: free 247
+++ ALLOC index: 13312 order: 10
1. start remap DVR zone 85400000(805dc000) 1024...
map_done is 0...
--- FREE index: 13312 order: 10
try_to_free_pages: free 158
+++ ALLOC index: 22016 order: 8
1. start remap DVR zone 87600000(80620000) 256...
map_done is 0...
--- FREE index: 22016 order: 8
try_to_free_pages: free 43
+++ ALLOC index: 13312 order: 10
1. start remap DVR zone 85400000(805dc000) 1024...
map_done is 0...
--- FREE index: 13312 order: 10
try_to_free_pages: free 156
+++ ALLOC index: 22016 order: 9
1. start remap DVR zone 87600000(80620000) 512...
map_done is 0...
try_to_free_pages: free 0
+++ ALLOC index: 13312 order: 9
1. start remap DVR zone 85400000(805dc000) 512...
map_done is 0...
--- FREE index: 22016 order: 9
--- FREE index: 13312 order: 9
try_to_free_pages: free 62
+++ ALLOC index: 22016 order: 8
1. start remap DVR zone 87600000(80620000) 256...
map_done is 0...
--- FREE index: 22016 order: 8
usb 1-2.2: USB disconnect, address 5
__scsi_remove_device(886)
FAT: unable to read inode block for updating (i_pos 1588741)
FAT: bread failed in fat_clusters_flush
hotplug eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
save exit: isCheckpointed 1
~ #
Seagate FreeAgent Theater+ прошивка 2.23 mos_r0 ( D-link dir620 перешитый в ZyXEL Keenetic) ASUS O!Play R1 amp_r11
User avatar
il76x
 
Posts: 16
Joined: 27 Oct 2011, 14:40

Re: xds42l to Seagate GoflexTV

Postby FarVoice » 17 Jul 2013, 14:52

хм. а вы точно втыкали свисток? Что-то я даже не увидел сообщения хотплага об обнаружении нового девайса...
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8573
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: xds42l to Seagate GoflexTV

Postby il76x » 17 Jul 2013, 14:57

я его 1 раз даже не выдёргивал после как прошился а 2 раз выдернул перегрузил приставку и воткнул обратно и снял через телнет.
и в 1 и во 2 случае он даже не моргнул
Seagate FreeAgent Theater+ прошивка 2.23 mos_r0 ( D-link dir620 перешитый в ZyXEL Keenetic) ASUS O!Play R1 amp_r11
User avatar
il76x
 
Posts: 16
Joined: 27 Oct 2011, 14:40

Re: xds42l to Seagate GoflexTV

Postby il76x » 17 Jul 2013, 15:58

Ещё один результат с другого USB
| +
sata_mars: Unknown symbol ata_scsi_slave_config
sata_mars: Unknown symbol ata_qc_new_init
sata_mars: Unknown symbol ata_std_dev_select
sata_mars: Unknown symbol ata_scsi_error
sata_mars: Unknown symbol ata_port_disable
sata_mars: Unknown symbol ata_probe_ent_alloc
sata_mars: Unknown symbol ata_scsi_queuecmd
sata_mars: Unknown symbol ata_qc_issue
sata_mars: Unknown symbol mars_qc_complete_noop
sata_mars: Unknown symbol ata_eng_timeout
sata_mars: Unknown symbol ata_port_stop
sata_mars: Unknown symbol CP_KEY
sata_mars: Unknown symbol ata_qc_prep
sata_mars: Unknown symbol ata_host_stop
sata_mars: Unknown symbol ata_device_add
sata_mars: Unknown symbol ata_port_start
libata version 1.12 loaded.
sata driver initial...2009/12/30 14:50
mars_init_sata(1255)dev_addr:c00834f0
ata_device_add(4893)probe begin
scsi0 : SATA_DRV
sata dma reset
set corepath: /tmp/hdd/volumes/HDD1/
hotplug eth0: link down
sata1: reset phy again!
sata phy reset
***128MB version...
Memory address 0x40000000
try_to_free_pages: free 848
+++ ALLOC index: 20480 order: 8
1. start remap DVR zone 87000000(80614000) 256...
map_done is 0...
hotplug eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
try_to_free_pages: free 835
+++ ALLOC index: 20992 order: 9
1. start remap DVR zone 87200000(80618000) 512...
map_done is 0...
try_to_free_pages: free 755
+++ ALLOC index: 20736 order: 7
1. start remap DVR zone 87100000(80616000) 128...
map_done is 0...
try_to_free_pages: free 707
sata1: reset phy again!
sata phy reset
+++ ALLOC index: 21504 order: 8
1. start remap DVR zone 87400000(8061c000) 256...
map_done is 0...
try_to_free_pages: free 732
+++ ALLOC index: 21760 order: 8
1. start remap DVR zone 87500000(8061e000) 256...
map_done is 0...
save exit: isCheckpointed 1
try_to_free_pages: free 949
+++ ALLOC index: 22528 order: 11
1. start remap DVR zone 87800000(80624000) 2048...
map_done is 0...
[I2C0] i2c speed changed to 50 KHz
[I2C0] i2c speed changed to 50 KHz
try_to_free_pages: free 834
+++ ALLOC index: 16384 order: 12
1. start remap DVR zone 86000000(805f4000) 4096...
map_done is 0...
try_to_free_pages: free 927
+++ ALLOC index: 12288 order: 10
1. start remap DVR zone 85000000(805d4000) 1024...
map_done is 0...
try_to_free_pages: free 359
+++ ALLOC index: 20864 order: 3
1. start remap DVR zone 87180000(80617000) 8...
map_done is 0...
try_to_free_pages: free 0
+++ ALLOC index: 8192 order: 12
1. start remap DVR zone 84000000(805b4000) 4096...
map_done is 0...
try_to_free_pages: free 19
+++ ALLOC index: 4096 order: 12
1. start remap DVR zone 83000000(80594000) 4096...
map_done is 998...
sata1: reset phy extra!
sata phy reset
This is the current time: PowerUP_Done!!!
[usb_param] setting for mars
Setting for MARS-B
[usb_param] set port two for host!
[usb1_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit
[usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
[usb2_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit
[usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
ehci_hcd ehci_hcd: EHCI Host Controller
ehci_hcd ehci_hcd: new USB bus registered, assigned bus number 1
ehci_hcd ehci_hcd: irq 2, io mem 0xb8013000
ehci_hcd ehci_hcd: park 0
ehci_hcd ehci_hcd: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub : individual port power switching
hub : individual port over-current protection
[cfyeh] set PPE = 0
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[usb_param] setting for mars
Setting for MARS-B
[usb_param] set port two for host!
[usb1_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit
[usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
[usb2_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit
[usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
usb 1-2: new high speed USB device using ehci_hcd and address 2
[usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x2, 3bit
ohci_hcd ohci_hcd: OHCI Host Controller
ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2
ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
hub : individual port power switching
hub : individual port over-current protection
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub : no power switching (usb 1.0)
hub : no over-current protection
sata1: reset phy extra!
sata phy reset
usb 1-2.1: new high speed USB device using ehci_hcd and address 3
###################################################################
[cfyeh-test] usb_set_configuration(1454)
Don't support this usb device or don't insert correct module yet!!!
bus_id 1-2.1:1.0 (config #1, interface 0)
###################################################################
save exit: isCheckpointed 1
sata1: reset phy extra!
sata phy reset
sata1: phy reset timeout!
sata1: no device found (phy stat 00000000)
sata1: ata_bus_probe failed
scsi1 : SATA_DRV
sata dma reset
sata2: reset phy again!
sata phy reset
sata2: reset phy again!
sata phy reset
sata2: phy reset timeout!
sata2: no device found (phy stat 00000000)
sata2: ata_bus_probe failed
try_to_free_pages: free 796
+++ ALLOC index: 22016 order: 7
1. start remap DVR zone 87600000(80620000) 128...
map_done is 127...
--- FREE index: 22016 order: 7
save exit: isCheckpointed 1
save exit: isCheckpointed 1
try_to_free_pages: free 728
+++ ALLOC index: 20928 order: 6
1. start remap DVR zone 871c0000(80617800) 64...
map_done is 55...
try_to_free_pages: free 965
+++ ALLOC index: 20880 order: 4
1. start remap DVR zone 87190000(80617200) 16...
map_done is 9...
try_to_free_pages: free 700
+++ ALLOC index: 20896 order: 4
1. start remap DVR zone 871a0000(80617400) 16...
map_done is 8...
try_to_free_pages: free 358
+++ ALLOC index: 20912 order: 4
1. start remap DVR zone 871b0000(80617600) 16...
map_done is 11...
try_to_free_pages: free 0
+++ ALLOC index: 22016 order: 4
1. start remap DVR zone 87600000(80620000) 16...
map_done is 9...
try_to_free_pages: free 612
+++ ALLOC index: 22032 order: 4
1. start remap DVR zone 87610000(80620200) 16...
map_done is 0...
try_to_free_pages: free 581
+++ ALLOC index: 22048 order: 4
1. start remap DVR zone 87620000(80620400) 16...
map_done is 11...
try_to_free_pages: free 528
+++ ALLOC index: 22064 order: 4
1. start remap DVR zone 87630000(80620600) 16...
map_done is 7...
try_to_free_pages: free 207
+++ ALLOC index: 22080 order: 4
1. start remap DVR zone 87640000(80620800) 16...
map_done is 6...
try_to_free_pages: free 680
+++ ALLOC index: 13312 order: 9
1. start remap DVR zone 85400000(805dc000) 512...
map_done is 179...
try_to_free_pages: free 856
+++ ALLOC index: 22144 order: 6
1. start remap DVR zone 87680000(80621000) 64...
map_done is 34...
try_to_free_pages: free 373
+++ ALLOC index: 22096 order: 4
1. start remap DVR zone 87650000(80620a00) 16...
map_done is 6...
try_to_free_pages: free 0
+++ ALLOC index: 22208 order: 6
1. start remap DVR zone 876c0000(80621800) 64...
map_done is 26...
try_to_free_pages: free 666
+++ ALLOC index: 20872 order: 3
1. start remap DVR zone 87188000(80617100) 8...
map_done is 7...
--- FREE index: 20872 order: 3
try_to_free_pages: free 436
+++ ALLOC index: 22112 order: 5
1. start remap DVR zone 87660000(80620c00) 32...
map_done is 19...
try_to_free_pages: free 40
+++ ALLOC index: 22272 order: 5
1. start remap DVR zone 87700000(80622000) 32...
map_done is 10...
try_to_free_pages: free 729
+++ ALLOC index: 22304 order: 4
1. start remap DVR zone 87720000(80622400) 16...
map_done is 5...
try_to_free_pages: free 71
+++ ALLOC index: 22320 order: 4
1. start remap DVR zone 87730000(80622600) 16...
map_done is 9...
try_to_free_pages: free 161
+++ ALLOC index: 22336 order: 4
1. start remap DVR zone 87740000(80622800) 16...
map_done is 9...
try_to_free_pages: free 94
+++ ALLOC index: 22352 order: 4
1. start remap DVR zone 87750000(80622a00) 16...
map_done is 12...
try_to_free_pages: free 0
+++ ALLOC index: 22368 order: 4
1. start remap DVR zone 87760000(80622c00) 16...
map_done is 6...
try_to_free_pages: free 0
+++ ALLOC index: 22384 order: 4
1. start remap DVR zone 87770000(80622e00) 16...
map_done is 4...
try_to_free_pages: free 118
+++ ALLOC index: 22400 order: 4
1. start remap DVR zone 87780000(80623000) 16...
map_done is 8...
try_to_free_pages: free 0
+++ ALLOC index: 22416 order: 4
1. start remap DVR zone 87790000(80623200) 16...
map_done is 10...
try_to_free_pages: free 165
+++ ALLOC index: 22464 order: 6
1. start remap DVR zone 877c0000(80623800) 64...
map_done is 13...
try_to_free_pages: free 0
+++ ALLOC index: 13824 order: 6
1. start remap DVR zone 85600000(805e0000) 64...
map_done is 42...
try_to_free_pages: free 408
+++ ALLOC index: 20872 order: 3
1. start remap DVR zone 87188000(80617100) 8...
map_done is 0...
try_to_free_pages: free 379
+++ ALLOC index: 22432 order: 3
1. start remap DVR zone 877a0000(80623400) 8...
map_done is 0...
--- FREE index: 22432 order: 3
--- FREE index: 22112 order: 5
--- FREE index: 22272 order: 5
try_to_free_pages: free 428
+++ ALLOC index: 13952 order: 7
1. start remap DVR zone 85680000(805e1000) 128...
map_done is 63...
--- FREE index: 13952 order: 7
try_to_free_pages: free 314
+++ ALLOC index: 13952 order: 7
1. start remap DVR zone 85680000(805e1000) 128...
map_done is 0...
--- FREE index: 13952 order: 7
usb 1-2.1: USB disconnect, address 3
usb 1-2.1: new high speed USB device using ehci_hcd and address 4
###################################################################
[cfyeh-test] usb_set_configuration(1454)
Don't support this usb device or don't insert correct module yet!!!
bus_id 1-2.1:1.0 (config #1, interface 0)
###################################################################
try_to_free_pages: free 1006
+++ ALLOC index: 13952 order: 7
1. start remap DVR zone 85680000(805e1000) 128...
map_done is 0...
--- FREE index: 13952 order: 7
usb 1-2.1: USB disconnect, address 4
~ #
Seagate FreeAgent Theater+ прошивка 2.23 mos_r0 ( D-link dir620 перешитый в ZyXEL Keenetic) ASUS O!Play R1 amp_r11
User avatar
il76x
 
Posts: 16
Joined: 27 Oct 2011, 14:40

Re: xds42l to Seagate GoflexTV

Postby FarVoice » 17 Jul 2013, 17:03

Если честно, лог зело кривой :(
Напрягло:
usb 1-2.1: new high speed USB device using ehci_hcd and address 3
###################################################################
[cfyeh-test] usb_set_configuration(1454)
Don't support this usb device or don't insert correct module yet!!!
bus_id 1-2.1:1.0 (config #1, interface 0)

ну и куча сообщений от sata_mars

Либо чего-то я забыл, либо добавил лишнего :( Надо смотреть файлы :(
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8573
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: xds42l to Seagate GoflexTV

Postby Virtual » 17 Jul 2013, 17:23

Либо чего-то я забыл, либо добавил лишнего Надо смотреть файлы

фигня это... такой лог при первом старте после прошивки (пока при первом старте не отработает depmod) :) потом будет намано

PS лог вполне конкретный проша понятия не имеет что за девайс в нее суют
100% нет VID PID девайса в хотплаге и в уже загруженных модулях
(если хотплаг не в курсе о девайсах но модуль ядра его знает - поможет предварительная загрузка модуля ядра через insmod тогда VID PID девайса появится в символах и он подхватится)
марсы: HDS7 (смотрелка AMP скин vrt уже без вариантов)
HDR12 AMP (обычно сервер с RAM 256 и возможностью подключить 2 SATA диска 2T+)
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.84 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6255
Joined: 01 Oct 2010, 17:17
Location: UFA RU

Re: xds42l to Seagate GoflexTV

Postby il76x » 17 Jul 2013, 18:51

И ещё есть несколько закавырок
1) модуль aPower так и не нашол чтобы избавится от постоянно мегающего светодиода на понели.
2)при включении модуля Home menu replacement всё конечно красиво но невозможно выйти в настройки (если взять пульт ASUS r1 и нежать кнопку setup то сразу в настройках) а SEAGETEовский ппульт ни на меню ни на домик не реагирует.
А так прошивка классная спасибо, теперь в ней даже перемотка есть курсором на плеере Глав ТВ .
Seagate FreeAgent Theater+ прошивка 2.23 mos_r0 ( D-link dir620 перешитый в ZyXEL Keenetic) ASUS O!Play R1 amp_r11
User avatar
il76x
 
Posts: 16
Joined: 27 Oct 2011, 14:40

Re: xds42l to Seagate GoflexTV

Postby Pokrass » 17 Jul 2013, 18:54

Вообще-то в Home menu replacement настройки в доке.
А если надо - включите и в главном.
Почитайте соответствующую тему - много полезного. Там даже на скриншотах все видно.
IconBIT HDS7L Fw: AMP_r12 GUI: VRT
iNeXT HD1 W Fw: X3D_Series_V4.0.2b160406
User avatar
Pokrass
 
Posts: 3107
Joined: 18 Mar 2012, 04:18
Location: Плюк. Планета № 215 в Тентуре галактики "Кин-дза-дза" в Спирали.

Re: xds42l to Seagate GoflexTV

Postby il76x » 17 Jul 2013, 19:06

Всё прошу прощения затупил, просто курсор на пульте вниз и всё OK. Остался мигающий (Фонарь) и WI FI а то 15 метров провода лежат посреди комнаты ;)
Seagate FreeAgent Theater+ прошивка 2.23 mos_r0 ( D-link dir620 перешитый в ZyXEL Keenetic) ASUS O!Play R1 amp_r11
User avatar
il76x
 
Posts: 16
Joined: 27 Oct 2011, 14:40

Re: xds42l to Seagate GoflexTV

Postby Virtual » 17 Jul 2013, 20:33

мигающий фонарь это вероятно дополнительный мелкочип рулящий питанием и иллюминацией (кст на хтримерах так же! тоже мигает пока ему не скажеш что хватит ;) /*пробуем в аповер профиль хтримера*/)
марсы: HDS7 (смотрелка AMP скин vrt уже без вариантов)
HDR12 AMP (обычно сервер с RAM 256 и возможностью подключить 2 SATA диска 2T+)
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.84 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6255
Joined: 01 Oct 2010, 17:17
Location: UFA RU

PreviousNext

Return to Seagate

Who is online

Users browsing this forum: No registered users and 1 guest