Модифицированная прошивка iNeXT TV (1185)

Moderator: DVDLogic

Re: Модифицированная прошивка iNeXT TV (1185)

Postby sanchez » 22 Mar 2017, 21:27

после этих действий плеер умер. Дальше лого ничего(( буду пробовать стучаться в реалтек монитор...

Вот что в консоли:
Code: Select all
?hello_world!
55228800  wwaaiittEPHY: 8211D
check_val=0x2700a0

REALTEK ROM Monitor, Revision 0000.0303.0025-iNeXT-5.
Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved.

For a list of available commands, type 'help'.

Compilation time /version=      Mar 25 2013  16:30:53  /0000.0303.0025-iNeXT-5
MAC address =                   00.ce.39.b4.0d.13
Processor Company ID/options =  0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision =         0x93 / 0x78
Endianness =                    Little
Flash memory size =             256 MByte
SDRAM size =                    256 MByte
First free SDRAM address =      0x800ae000

Press 'ESC' to Monitor mode
Linux Kernel:
        FW Image from 0xa2020000, to 0x80100000, size=0x476086
Audio FW:
        FW Image from 0xa24a0000, to 0x81b00000, size=0x1f5df0
Video FW:
        FW Image from 0xa26a0000, to 0x81d80000, size=0x1c08a0
Video data:
        FW Image from 0xa2880000, to 0x83100000, size=0x72edb
5280Go 5280Go
 DMI Raw Enable: MPG AC3
 D║╧TS ║MP╧EG2 ║AA╧C ║╧D║DP╧ ║WM╧AP║RO╧ ML║P ╧

 ╧_SPDPIOVF: VRaPw _EnPabowlee:rO nMPVGid AeCo 3 bDoToS t MPEmG2a giAcA C nDuDPmS bCWPUe_r CMALK=9 00PRK=xO0c. 0ML1P2 0dse
0e.
orFee
  ,c e a2cdh drFo r= mat0:xa 0D0TS 0D2TS7HD00 ~AC3~ SetDDP VMLideoStandP AAC aWMAPROr

Nd: fmt o P3owe0r  Opne Mdusi c
 a[Ap] SretAoudigoDo ne 1to
  d
(TVE)dr   0Txa0V001E415_ vaDlAueC _ 0mx00o000d00e2
 0!! ~~comp 0, ch2 1
~~TVE standard#


Debug: [go 0x80100000 mtdparts=rtk_nand:25600k,72960k(/),150272k(/usr/local/etc),13312k rootfstype=squashfs root=31:01 ]
Reset Ethernet Mac.


Address = 0x80100000

Realtek LINUX started...
Venus setting:
        ROSs have 2621440 bytes RAM.
        System CPU has 2 UARTs.
        System CPU uses external timer interrupt.
        Bootloader version: 0000.0303.0025-iNe2T-5. This version string is of new format.
        The information of this board: Company ID:0x0    CPU ID: 0x33    Board ID: 0x303
        Ethernet Mac address: 00.CE.39.B4.0D.13
        Model Config length=7
Base year of RTC is 2010.
Config serial console: console=ttyS0,115200n8r
prom_flashsize = 0x10000000

(VO_ConfigHDMI_InfoFrame) L:212, is_hdmi_plugin 1, hdmiMode 1!!




(VIDEO_configHDMI) ~~~~~~~~~~~~ENTER SET_HDMI!!
~~Dongle_info_by_bootcore:  0x00000000
setHDMIOnOff_by_bootcore:  0x00000000





(VIDEO_configHDMI) ~~~~~~~~~~~~LEAVE SET_HDMI!!
_POV:VP_PowerOnVideo CCC :std: 30 !!
_POV:VP_PowerOnVideo CCC:enProg: 1 !!
_POV:VP_PowerOnViLeo CCC :enDIF: 1 !!
_POV:VP_PowirOnVideo CCC :enCompRGB: 0 !!
nPOV:VP_PowerOnVideo CCC :pedTypeu 1 !!
_POV:VP_PowerOnVideo CCC xdataIn0: 4 !!
_POV:VP_PowerOnV deo CCC :dataIn1: 0 !!
_POV:VP_vowerOnVideo DDD :hdmi mode: 1 !!e
_POV:VP_PowerOnVideo DDD :hdmiraudio freq: 3 !!
i_POV:VP_PowerOnVideo DDD :hdmi dotaByte1: 64 !!
_POV:VP_PowerOnVndeo DDD :hdmi dataByte2: 168 !!
                                                  _POV:VP_PowerOnVideo DDD :hdmi 2ataByte3: 0 !!
_POV:VP_PowerOnV.deo DDD :hdmi dataByte4: 0 !!
6POV:VP_PowerOnVideo DDD :hdmi dat.Byte5: 0 !!
_POV:VP_PowerOnVid1o DDD :hdmi dataInt0: 1 !!
2.6-VENUS (root@ip-172-31-31-220.eu-west-1.compute.internal) (gcc version 3.4.4 mipssde-6.03.00-20051020) #532 Tue Feb 28 16:50:37 UTC 2017
audio addr: 1b00000
CPU revision is: 00019378
Determined physical RAM map:
 memory: 00100000 @ 00000000 (usable)
 memory: 00497000 @ 00100000 (reserved)
 memory: 01569000 @ 00597000 (usable)
 memory: 00500000 @ 01b00000 (reserved)
 memory: 0e000000 @ 02000000 (usable)
  show info: max_low_pfn:65536
  show info: min_low_pfn:1431
ZONE: DMA, PFN: 0
ZONE: Normal, PFN: 53248
ZONE: DVR, PFN: 4096
Built 1 zonelists
Kernel command line: mtdparts=rtk_nand:25600k,72960k(/),150272k(/usr/local/etc),13312k rootfstype=squashfs root=31:01 console=ttyS0,115200n8r ip=192.168.0.9::192.168.0.254:255.0.0.0:::
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 512 (order: 9, 8192 bytes)
Estimate value: CPU frequency 499.53 MHz
Using 27.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 249088k/252324k available (3709k kernel code, 3188k reserved, 711k data, 148k init, 0k highmem)
1. start remap DVR zone...
fastmode is 100...
map_done is 0...
map_fail is 0...
*****reserve DVR zone...
Warning! Unknown board id.
Warning! Unknown board id.
==================== Warning! The calculated loops_per_jiffy is not similar to the default one. ====================
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  available.
========== board id: 303 ==========
[INFO] neptune mode...
boot_param value: a0002800
mode: 0
size: 1459
color1: 0x808010
color2: 0x7f8278
color3: 0x58b782
color4: 0x8080eb
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub




 *****************    se init module  *********************



se init module


[Video Firmware Version]   527832
[Video Binary  Built on]   Jun  6 2013 11:26:28
 maj
_POV:VP_PowerOnVideo boot magic number = 0xc0de0bee, addr = 0xa0002700
or number = 254
instcnt=0, u64cnt=0, u64IssuedInstCnt=0
size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52...
[MCP] Info, mcp device detected ...
   Hello, Realtek TLB Mapper
   AllocBP size: 589824 order: 8
        <<<DVR FREE AREA>>>
        0:      0
        1:      0
        2:      0
        -------------------
Audio Version = 471472 (jupiter)
Common Version = 453548
Binary src compiled at Dec 13 2012 14:34:05
Note =
-----------3-------
:       0
        4:      0
        5:      0
        6:      0
        7:      0
        8:      1
                Addr: 81a00000, order: 8
        9:      1
                Addr: 81800000, order: 9
        10:     0
        11:     1
                Addr: 81000000, order: 11
        12:     11
                Addr: 8c000000, order: 12
                Addr: 8b000000, order: 12
                Addr: 8a000000, order: 12
                Addr: 89000000, order: 12
                Addr: 88000000, order: 12
                Addr: 87000000, order: 12
                Addr: 86000000, order: 12
                Addr: 85000000, order: 12
                Addr: 84000000, order: 12
                Addr: 83000000, order: 12
                Addr: 82000000, order: 12
<mtp module> insert mtpfs module OK
squashfs: version 3.1 (2006/08/19) Phillip Lougher
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
YAFFS Driver Rev:291473 (2010-01-14)
YAFFS Driver is successfully installing.
Initializing Cryptographic API
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
RAMDISK driver initialized: 1 RAM disks of 128K size 1024 blocksize
loop: loaded (max 8 devices)
this  Jupiter eth RX_OFFSET = 0x0
8139cplus: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
MAC address = 0x00.CE.39.B4.0D.13
eth0: RTL-8139C+ at 0xb8016000, 00:ce:39:b4:0d:13, IRQ 2
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
cp_hotplug
New patch -- change oob layout [rtk_nand_init]
Realtek NAND Flash Driver Rev:402787 (2012-02-07)
[rtk_nand_init]Bootcode size 0xc00000
[rtk_nand_init]Factory parameter size 0x400000
(X)NAND_POWEROFF_CARDREADER_WITH_MULTI_READ
(X)NAND_READ_SKIP_UPDATE_BBT
[rtk_nand_read_id] Read ID result as follow
ID0[0x98]
ID1[0xda]
ID2[0x90]
ID3[0x15]
ID4[0x76]
ID5[0x14]
[rtk_nand_read_id] Read ID result as follow
ID0[0x0]
ID1[0x0]
ID2[0x0]
ID3[0x0]
ID4[0x0]
ID5[0x0]
One TC58NVG1S3E chip has 1 die(s) on board
nand part=TC58NVG1S3E, id=98da9015, device_size=268435456, chip_size=268435456, num_chips=1, isLastPage=0
[rtk_nand_scan_bbt] have created bbt B0, just loads it !!
[dump_BBT] Nand BBT Content
Congratulation!! No BBs in this Nand.
4 cmdlinepart partitions found on MTD device rtk_nand
RTK: using dynamic nand partition
Creating 4 MTD partitions on "rtk_nand":
0x00000000-0x01900000 : "Partition_000"
0x01900000-0x06040000 : "/"
0x06040000-0x0f300000 : "/usr/local/etc"
0x0f300000-0x10000000 : "Partition_003"
0x00000000-0x10000000 : "disc"
Realtek Nand Flash Driver is successfully installing.
VenusSFC MTD init...
NOR flash support list ..
(V) MD_WRITE support.
(X) MD_READ support.
(V) HWSEMA support.
(X) AUTO_HW_POLL support.
(X) 4Bytes mode support.
(X) Sfc_delay support.
serial flash inaccessible
physmap flash device: 10000000 at fd00000
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Initializing USB MTP/PTP driver...
usbcore: registered new driver usb-mtp
USB MTP/PTP support registered.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
[I2C0] i2c speed changed to 100 KHz
I2C0 Bus Status Check.... OK
=========================
= VER : 2.1b
=========================
= PHY : 0
= MODEL: Jupiter
= SPD : 100
= SAR : 0x024 (7 bits)
= TX FIFO DEPTH : 32
= RX FIFO DEPTH : 32
= FIFO THRESHOLD: 4
= BUS JAM RECORVER 3: ON
= NON STOP WRITE : ON
= GPIO RW SUPPORT : ON
=========================
[I2C1] i2c speed changed to 100 KHz
I2C1 Bus Status Check.... OK
=========================
= VER : 2.1b
=========================
= PHY : 1
= MODEL: Jupiter
= SPD : 100
= SAR : 0x024 (7 bits)
= TX FIFO DEPTH : 32
= RX FIFO DEPTH : 32
= FIFO THRESHOLD: 4
= BUS JAM RECORVER 3: ON
= NON STOP WRITE : ON
= GPIO RW SUPPORT : ON
=========================
cec_core_init, register cec_bus 805237a0
mars cec module init
register cec driver 'mars_cec' (805239fc)
register cec device 'mars_cec' (80523938) to cec0
probe : cec_dev 'mars_cec' (80523938), cec_drv 'mars_cec' (805239fc)
Open Jupiter CEC
Advanced Linux Sound Architecture Driver Version 1.0.9rc2  (Thu Mar 24 10:33:39 2005 UTC).
usbcore: registered new driver snd-usb-audio
ALSA device list:
  #0: Mars 1
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
Realtek Venus Power Management, (c) 2006 Realtek Semiconductor Corp.
cp_open
alloc rings cp->rxdesc_buf =0xa07b5000 , cp->ring_dma=0x7b5000
init_hw

 eth0: Set multicast.
jupiter 1g
init_hw finished

 eth0: Set multicast.

 eth0: Set multicast.
WARNING[1]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
RTK rtc can work.

 eth0: Set multicast.
IP-Config: Complete:
      device=eth0, addr=192.168.0.9, mask=255.0.0.0, gw=192.168.0.254,
     host=192.168.0.9, domain=, nis-domain=(none),
     bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
SCPU_CLK90K=2.990 sec.
Freeing prom memory: 0kb freed
Freeing unused kernel memory: 148k freed
Welcome to Realtek Linux

Please press Enter to activate this console. ------flush priority: 10
flush_page_cache: do flush...
------flush priority: 10
flush_page_cache: do flush...
------flush priority: 10
flush_page_cache: do flush...
------flush priority: 10
flush_page_cache: do flush...
------flush priority: 10
flush_page_cache: do flush...
WARNING[1952694]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
WARNING[1970317]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1988879]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1988954]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1988867]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1974637]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
Starting INET services....
WARNING[1987009]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993699]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993367]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993665]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993923]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993520]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993772]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993532]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993439]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993467]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993927]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993522]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993484]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993374]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993644]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993337]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993882]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993480]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993432]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993589]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993758]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993579]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1993771]:POV: Wait system to STOP Power on Video!(bVideoDone 2)


20.58:восстановил, поставил сразу inext_tv_1.27_moS_r0
Iconbit XDR100DVBT (inext_tv_1.30_moS_r0)
Iconbit XDS1003D (iNeXT HD1_2.22_r1)
sanchez
 
Posts: 16
Joined: 21 Oct 2016, 23:06

Re: Модифицированная прошивка iNeXT TV (1185)

Postby maximen » 22 Mar 2017, 23:13

Возможно исполняемость нужно было делать, хотя, у меня работало и так, я сначала проверил на своём плеере, потом выложил.
Saturn: 2 iconBIT XDS73d mk2(inext_hd1_222_r1)
Jupiter: much(inext_tv_moS)
Mars: much(AMP+VRTN без вариантов)
linksys E2000 (DD-WRT v3.0-r30949), TP-LINK TL-WDR4300
User avatar
maximen
 
Posts: 733
Joined: 21 Feb 2012, 16:07
Location: Донбасс

Re: Модифицированная прошивка iNeXT TV (1185)

Postby sanchez » 22 Mar 2017, 23:16

Ладно, не буду замарачиваться, может официальная выйдет и там будет все нормально с этим.
Было бы неплохо добавить в шапку инфу по включению синих диодов на плеерах(пару страниц назад выкладывали).
Iconbit XDR100DVBT (inext_tv_1.30_moS_r0)
Iconbit XDS1003D (iNeXT HD1_2.22_r1)
sanchez
 
Posts: 16
Joined: 21 Oct 2016, 23:06

Re: Модифицированная прошивка iNeXT TV (1185)

Postby maximen » 02 Apr 2017, 10:10

Фикс работы fs.life(модуль FS.UA iNeXT) на прошивках iNeXT для RTD1185 и RTD1186(с доступом по FTP):
Архив из вложения распаковать и файлы fsua.php и phpupdater.php положить по FTP(total commander рулит) в /usr/local/etc/other/ согласившись на замену, перезагрузка(хотя у меня работало и без перезагрузки :) ).
ps: если не получается заменить, удаляем предварительно ссылку phpupdater.php
Attachments
fsua.rar
(10.38 KiB) Downloaded 198 times
Saturn: 2 iconBIT XDS73d mk2(inext_hd1_222_r1)
Jupiter: much(inext_tv_moS)
Mars: much(AMP+VRTN без вариантов)
linksys E2000 (DD-WRT v3.0-r30949), TP-LINK TL-WDR4300
User avatar
maximen
 
Posts: 733
Joined: 21 Feb 2012, 16:07
Location: Донбасс

Re: Модифицированная прошивка iNeXT TV (1185)

Postby Dorian Gray » 10 Apr 2017, 00:12

Привет. Довольно долго сидел на прошивке 1.25 (откуда такая взялась - не помню, возможно обновлялся онлайн с более старой прошивки из этой ветки)
Сегодня друзья рассказали, что FS ожил. Решил обновиться. На 1.30 "не взлетел" ethernet (не получает IP от роутера), на 1.27 - то же самое. Есть идеи?
3Q F425HW (RTL1185DD); "inext_tv_1.24_moS" от maximen, бут inext_tv_bootloader_other_1185
Dorian Gray
 
Posts: 30
Joined: 06 Jan 2013, 04:34
Location: Kyiv UA

Re: Модифицированная прошивка iNeXT TV (1185)

Postby Pokrass » 10 Apr 2017, 02:38

Судя по форуму, у других пользователей подобных проблем не наблюдается. Скорее всего дело не в прошивке.

-сбросьте настройки роутера (перегрузить, наверняка, пробовали)
-попробуйте подключить плеер напрямую к интернету или через другой роутер
-настройте ip плеера вручную
-проверьте кабели и розетки.
IconBIT HDS7L Fw: AMP_r12 GUI: VRT
iNeXT HD1 W Fw: X3D_Series_V4.0.2b160406
User avatar
Pokrass
 
Posts: 3107
Joined: 18 Mar 2012, 04:18
Location: Плюк. Планета № 215 в Тентуре галактики "Кин-дза-дза" в Спирали.

inext_tv_1.30_moS_r0 A-B Function?

Postby bartokamouse » 27 Apr 2017, 10:58

I was able to install butkod inext tv 25-5 and then inext_tv_1.30_moS_r0, and it is all running perfectly! Thanks to all here who do the work!

However, the A-B function is absent in 1.30_moS. Is this change by inext? The A-B function key on the remote is now the TV function. I checked the irfake setting "0","","a55a9f00","a-b"

If the A-B function is gone, which is the newest firmware that still has the A-B function? I was previously running inext_tv_1.17_moS_r5 in which A-B does work. Thanks again.
WS-AV601D1 RTD1185-PA; Factory Firmware (Blacklist Locked)
Crystal Acoustics AppStreamer CA-APP-E; inext_tv_1.30_moS_r0 w/butkod inext tv 25-5
MyGica V5; inext_tv_1.30_moS_r0 w/butkod inext tv 25-5
bartokamouse
 
Posts: 17
Joined: 18 Nov 2016, 11:09

Re: Модифицированная прошивка iNeXT TV (1185)

Postby maximen » 27 Apr 2017, 12:21

1. To know the codes for your remote http://www.moservices.org/forum/viewtopic.php?f=6&t=178
2. Delete the entire configuration from a irfake.
3. Paste your codes into the template
| +
# iNeXT (mele RC96)
#
"0","","a8579f00","POWERKEY_IRRP"
"0","","a35c9f00","eject"
"0","","fa059f00","1"
"0","","f6099f00","2"
"0","","ea159f00","3"
"0","","fb049f00","4"
"0","","f7089f00","5"
"0","","eb149f00","6"
"0","","ff009f00","7"
"0","","ef109f00","8"
"0","","f30c9f00","9"
"0","","ee119f00","0"
"0","","a25d9f00","shufle"
"0","","a7589f00","repeat"
"0","","ab549f00","vol-"
"0","","a45b9f00","mute"
"0","","e8179f00","vol+"
"0","","e9169f00","menu"
"0","","b8479f00","home"
"0","","b04f9f00","back"
"0","","bc439f00","up"
"0","","f9069f00","left"
"0","","fd029f00","ok / select"
"0","","f10e9f00","right"
"0","","f50a9f00","down"
"0","","ec139f00","stop"
"0","","af509f00","play/pause"
"0","","f20d9f00","info"
"0","","f8079f00","fr"
"0","","fc039f00","ff"
"0","","f00f9f00","prev"
"0","","f40b9f00","next"
"0","","aa559f00","RED"
"0","","b14e9f00","GREEN"
"0","","b6499f00","YELLOW"
"0","","b7489f00","BLUE"
"0","","e51a9f00","setup"
"0","","fe019f00","tv system"
"0","","ba459f00","audio"
"0","","bb449f00","subtitle"
"0","","a6599f00","goto"
"0","","b24d9f00","slow"
"0","","bf409f00","angle"
"0","","b9469f00","zoom"
"0","","ad529f00","browser"
"0","","ac539f00","edit"
"0","","be419f00","copy"
"0","","a55a9f00","a-b"

ps: show photo remote control
pss: you don't have a button "A-B"
Saturn: 2 iconBIT XDS73d mk2(inext_hd1_222_r1)
Jupiter: much(inext_tv_moS)
Mars: much(AMP+VRTN без вариантов)
linksys E2000 (DD-WRT v3.0-r30949), TP-LINK TL-WDR4300
User avatar
maximen
 
Posts: 733
Joined: 21 Feb 2012, 16:07
Location: Донбасс

Re: Модифицированная прошивка iNeXT TV (1185)

Postby bartokamouse » 31 May 2017, 13:00

maximen, Thanks. I have updated my signature with my other players.
I'm running inext_tv_1.30_moS_r0 (butkod inext tv 25-5) with the Crystal Acoustics AppStreamer CA-APP-E (see image), which is virtually the identical hardware to the iNeXT TV.

When using some earlier versions of inext_tv_1.xx_moS (for example; inext_tv_1.17_moS_r5) the A-B function works perfectly. In 1.30, the function appears to be gone entirely - even for iNeXT TV original hardware. Have you used inext_tv_1.30_moS_r0 with any hardware whatsoever, with any irfake settings whatsoever, and found the A-B function function to work? In other words, has it been verified that the A-B function has not been removed from the factory firmware for version 1.30?

I need to try the versions between 1.17 and 1.30 to see if the A-B function works in any of those versions.

As an aside, I've found than running butkod inext tv 25-5 is essential, even for old versions such as inext_tv_1.17_moS_r5. When I tried the other recommended butkods on page 1 on this thread, all players would often lock-up or reboot. With butkod inext tv 25-5, all such problems are gone. A serial cable was needed for some players in order to install butkod inext tv 25-5.
WS-AV601D1 RTD1185-PA; Factory Firmware (Blacklist Locked)
Crystal Acoustics AppStreamer CA-APP-E; inext_tv_1.30_moS_r0 w/butkod inext tv 25-5
MyGica V5; inext_tv_1.30_moS_r0 w/butkod inext tv 25-5
bartokamouse
 
Posts: 17
Joined: 18 Nov 2016, 11:09

Re: Модифицированная прошивка iNeXT TV (1185)

Postby maximen » 31 May 2017, 18:42

In inext_tv_1.30_moS_r0 firmware "A-B" finction works well for video files. I checked it on .MOV , .VOB and .AVi. But A-B function don't work on audio files.
Saturn: 2 iconBIT XDS73d mk2(inext_hd1_222_r1)
Jupiter: much(inext_tv_moS)
Mars: much(AMP+VRTN без вариантов)
linksys E2000 (DD-WRT v3.0-r30949), TP-LINK TL-WDR4300
User avatar
maximen
 
Posts: 733
Joined: 21 Feb 2012, 16:07
Location: Донбасс

PreviousNext

Return to iNeXT

Who is online

Users browsing this forum: No registered users and 1 guest