Asus O!Play Mini (RTD 1055)

Re: Asus O!Play mini

Postby FarVoice » 13 Oct 2011, 13:19

eugeny13 wrote:привет.пробовал fw_Htravel_XD_20110601_v202B_upd2 .включилось языковое меню.пульт не реагирует .

а ссылку на прошивку можно?
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: Asus O!Play mini

Postby eugeny13 » 13 Oct 2011, 13:19

привет.не могу добавить пишет Расширение log запрещено администратором
Лог | +
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.10.13 11:14:06 =~=~=~=~=~=~=~=~=~=~=~=

?hello_world!
52582080 wwaaiitt[HDMI]: Set I2C Speed = 50 kHz

[HDMI]: Chk_HotPlug() TV is not connected.

[HDMI]: Read_EDID abort, HDMI cable plug off.

[HDMI]: TV is not connected.

NTSC logo


REALTEK ROM Monitor, Revision 0000.0302.0013.
Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved.

For a list of available commands, type 'help'.

Compilation time /version= Nov 22 2010 18:16:09 /0000.0302.0013

MAC address = 00.11.22.33.44.55

Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00

Processor ID/revision = 0x93 / 0x78

Endianness = Little
Flash memory size = 16 MByte

SDRAM size = 128 MByte

First free SDRAM address = 0x800a1000


Press 'ESC' to Monitor mode

Realtek> erase -m
Erasing..................................................................Done
Realtek>
?hello_world!
5258280 0w awiaitt[HDMI]: Set I2C Speed = 50 kHz

[HDMI]: Chk_HotPlug() TV is not connected.

[HDMI]: Read_EDID abort, HDMI cable plug off.

[HDMI]: TV is not connected.

NTSC logo


REALTEK ROM Monitor, Revision 0000.0302.0013.
Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved.

For a list of available commands, type 'help'.

Compilation time /version= Nov 22 2010 18:16:09 /0000.0302.0013

MAC address = 00.11.22.33.44.55

Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00

Processor ID/revision = 0x93 / 0x78

Endianness = Little
Flash memory size = 16 MByte

SDRAM size = 128 MByte

First free SDRAM address = 0x800a1000


Press 'ESC' to Monitor mode

Can not find signature string, "SCIT____"! Entering rescue linux...

Rescue kernel in FLASH, total size = 0xeff90



seg.1 addr 0xbfc44000, size = 0xbb000



seg.2 addr 0xbfbbb000, size = 0x34f90

copy rescue0: from bfc44000 to 81000000, len = bb000

copy rescue1: from bfbbb000 to 810bb000, len = 34f90

decompressing rescue: from 81000000 to 80100000: size = eff90

lzma finished

decompressing rescue done

go 0x80100000




Address = 0x80100000


Realtek LINUX started...
Venus setting:
ROSs have 2621440 bytes RAM.
System CPU has 1 UART.
System CPU uses external timer interrupt.
Bootloader version: 0000.0302.0013. This version string is of new format.
Error! Unknown SB2_CHIP_INFO. Linux is too old?
Ethernet Mac address: 00.11.22.33.44.55
Model Config length=0
Base year of RTC is 2010.
Config serial console: console=ttyS0,115200n8r
prom_flashsize = 0x01000000
Linux version 2.6.12.6-VENUS (alan@localhost.localdomain) (gcc version 3.4.4 mipssde-6.03.00-20051020) #6 Mon Sep 27 16:34:43 CST 2010

**************************************************************

You didn't specify audio image address, use default instead...

**************************************************************

audio addr: 0

CPU revision is: 00019378

Determined physical RAM map:

memory: 00100000 @ 00000000 (usable)

memory: 002a1000 @ 00100000 (reserved)

memory: 019df000 @ 003a1000 (usable)

memory: 00280000 @ 01d80000 (reserved)

memory: 06000000 @ 02000000 (usable)

show info: max_low_pfn:32768

show info: min_low_pfn:929

Built 1 zonelists

Kernel command line: console=ttyS0,115200n8r ip=192.168.178.2::192.168.178.1:255.255.255.0:::

Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.

Primary data cache 32kB, 4-way, linesize 32 bytes.

Synthesized TLB refill handler (20 instructions).

Synthesized TLB load handler fastpath (32 instructions).

Synthesized TLB store handler fastpath (32 instructions).

Synthesized TLB modify handler fastpath (31 instructions).

Cache parity protection disabled

PID hash table entries: 256 (order: 8, 4096 bytes)

Estimate value: CPU frequency 499.53 MHz

Using 27.000 MHz high precision timer.

Console: colour dummy device 80x25

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 123648k/125820k available (1891k kernel code, 2112k reserved, 288k data, 440k init, 0k highmem)

Warning! Unknown board id.

Warning! Unknown board id.

==================== Warning! The calculated loops_per_jiffy is not similar to the default one. ====================

Mount-cache hash table entries: 512

Checking for 'wait' instruction... available.

Linux NoNET1.0 for Linux 2.6

SCSI subsystem initialized

usbcore: registered new driver hub

GPIO: register IRQ 3... (Success)

se init module major number = 254

size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52...

Hello, Realtek TLB Mapper

AllocBP size: 294912 order: 7

<<<DVR FREE AREA>>>

0: 0

1: 0

2: 0

3: 0

4: 0

5: 0

6: 0

7: 0

8: 0

9: 0

10: 0

11: 0

12: 6

Addr: 87000000, order: 12

Addr: 86000000, order: 12

Addr: 85000000, order: 12

Addr: 84000000, order: 12

Addr: 83000000, order: 12

Addr: 82000000, order: 12

devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x0

NTFS driver 2.1.28 [Flags: R/O].

Serial: 8250/16550 driver $Revision: 1.90 $ 3 ports, IRQ sharing enabled

ttyS0 at MMIO 0x0 (irq = 3) is a 16550A

io scheduler noop registered

RAMDISK driver initialized: 1 RAM disks of 128K size 1024 blocksize

loop: loaded (max 8 devices)

libata version 1.12 loaded.

sata driver initial...2010/07/26 14:25

JUPITER(Ver.A): one port supported

SATA phy clock are disabled.

VenusSFC MTD init...

NOR flash support list ..

(V) HWSEMA support.

(V) AUTO_HW_POLL support.

(X) 4Bytes mode support.

(V) Max erase size support.

(X) Sfc_delay support.

*byte1=0xc2

*byte2=0x17

VenusSFC MTD: MXIC MX25L12845E detected.

VenusSFC MTD: Use max erase size support.

VenusSFC MTD: Enable VenusSFC MD PP callback function.

RedBoot partition parsing not available

Venus SFC: using single partition Venus SFC: (for SST/SPANSION/MXIC SPI Flash)

physmap flash device: 1000000 at 1ed00000

Nand Flash Clock is NOT Open. Installing fails.

[usb_param] setting for jupiter

#######[cfyeh-debug] USBPHY_Register_Setting(901) jupiter B.2

[usb_param] set port two for host!

#@# cfyeh-debug USBPHY_SetReg_Default_33_port(239) port 1 dr 1

#@# cfyeh-debug USBPHY_SetReg_Default_33_port(239) port 2 dr 1

#@# cfyeh-debug USBPHY_SetReg_Default_39(418) tx_delay 2

[usb1_param] usbphy reg 32, set sh = 0x8, get sh = 0x8, 4bit

[usb1_param] usbphy reg 35, set src = 0x2, get src = 0x2, 3bit

[usb1_param] usbphy reg 36, set senh = 0x9, get senh = 0x9, 4bit

[usb1_param] usbphy reg 32, set sen = 0x9, get sen = 0x9, 4bit

[usb1_param] usbphy reg 33, set dr = 0x1, get dr = 0x1, 3bit

[usb1_param] usbphy reg 31, set sr = 0x7, get sr = 0x7, 3bit

[usb1_param] usbphy reg 30, set cp = 0x1, get cp = 0x1, 3bit

[usb1_param] usbphy reg 30, set sc = 0x1, get sc = 0x1, 4bit

[usb2_param] usbphy reg 32, set sh = 0x8, get sh = 0x1, 4bit

[usb2_param] usbphy reg 35, set src = 0x2, get src = 0x0, 3bit

[usb2_param] usbphy reg 36, set senh = 0x9, get senh = 0x2, 4bit

[usb2_param] usbphy reg 32, set sen = 0x9, get sen = 0x2, 4bit

[usb2_param] usbphy reg 33, set dr = 0x1, get dr = 0x1, 3bit

[usb2_param] usbphy reg 31, set sr = 0x7, get sr = 0x1, 3bit

[usb2_param] usbphy reg 30, set cp = 0x1, get cp = 0x1, 3bit

[usb2_param] usbphy reg 30, set sc = 0x1, get sc = 0x4, 4bit

ehci_hcd ehci_hcd: EHCI Host Controller

ehci_hcd ehci_hcd: new USB bus registered, assigned bus number 1

ehci_hcd ehci_hcd: irq 2, io mem 0xb8013000

ehci_hcd ehci_hcd: park 0

ehci_hcd ehci_hcd: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

hub : individual port power switching

hub : individual port over-current protection

[cfyeh] set PPE = 0

[usb_param] setting for jupiter

#######[cfyeh-debug] USBPHY_Register_Setting(901) jupiter B.2

[usb_param] set port two for host!

#@# cfyeh-debug USBPHY_SetReg_Default_33_port(239) port 1 dr 1

#@# cfyeh-debug USBPHY_SetReg_Default_33_port(239) port 2 dr 1

#@# cfyeh-debug USBPHY_SetReg_Default_39(418) tx_delay 2

[usb1_param] usbphy reg 32, set sh = 0x8, get sh = 0x8, 4bit

[usb1_param] usbphy reg 35, set src = 0x2, get src = 0x2, 3bit

[usb1_param] usbphy reg 36, set senh = 0x9, get senh = 0x9, 4bit

[usb1_param] usbphy reg 32, set sen = 0x9, get sen = 0x9, 4bit

[usb1_param] usbphy reg 33, set dr = 0x1, get dr = 0x1, 3bit

[usb1_param] usbphy reg 31, set sr = 0x7, get sr = 0x7, 3bit

[usb1_param] usbphy reg 30, set cp = 0x1, get cp = 0x1, 3bit

[usb1_param] usbphy reg 30, set sc = 0x1, get sc = 0x1, 4bit

[usb2_param] usbphy reg 32, set sh = 0x8, get sh = 0x1, 4bit

[usb2_param] usbphy reg 35, set src = 0x2, get src = 0x0, 3bit

[usb2_param] usbphy reg 36, set senh = 0x9, get senh = 0x2, 4bit

[usb2_param] usbphy reg 32, set sen = 0x9, get sen = 0x2, 4bit

[usb2_param] usbphy reg 33, set dr = 0x1, get dr = 0x1, 3bit

[usb2_param] usbphy reg 31, set sr = 0x7, get sr = 0x1, 3bit

[usb2_param] usbphy reg 30, set cp = 0x1, get cp = 0x1, 3bit

[usb2_param] usbphy reg 30, set sc = 0x1, get sc = 0x4, 4bit

ohci_hcd ohci_hcd: OHCI Host Controller

ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2

ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

hub : no power switching (usb 1.0)

hub : no over-current protection

Initializing USB Mass Storage driver...

usb 1-1: new high speed USB device using ehci_hcd and address 2

###################################################################

[cfyeh-test] usb_set_configuration(1454)

Don't support this usb device or don't insert correct module yet!!!

bus_id 1-1:1.0 (config #1, interface 0)

###################################################################

scsi0 : SCSI emulation for USB Mass Storage devices

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

#######[cfyeh-debug] dwc_otg_driver_init(900) for otg device

Setting registers , Enable OTG

dwc_otg: version 2.60a 22-NOV-2006

DWC_otg: Shared Tx FIFO mode

i2c /dev entries driver

[I2C0] i2c speed changed to 100 KHz

I2C0 Bus Status Check.... OK

=========================

= VER : 2.1b

=========================

DWC_otg: USB RESET

= PHY : 0

= MODE: MARS/JUPITER

= SPD : 100

= SAR : 0x024 (7 bits)

= TX FIFO DEPTH : 32

= RX FIFO DEPTH : 32

= FIFO THRESHOLD: 4

= BUS JAM RECORVER 3: ON

= NON STOP WRITE : OFF

= GPIO RW SUPPORT : ON

= I2C DELAY : OFF

=========================

[I2C1] i2c speed changed to 100 KHz

I2C1 Bus Status Check.... OK

=========================

= VER : 2.1b

=========================

= PHY : 1

= MODE: MARS/JUPITER

= SPD : 100

= SAR : 0x024 (7 bits)

= TX FIFO DEPTH : 32

= RX FIFO DEPTH : 32

= FIFO THRESHOLD: 4

= BUS JAM RECORVER 3: ON

= NON STOP WRITE : OFF

= GPIO RW SUPPORT : ON

= I2C DELAY : OFF

=========================

Freeing prom memory: 0kb freed

Reclaim bootloader memory from 80010000 to 800f0000

Freeing unused kernel memory: 440k freed


init started: BusyBox v1.1.3 (2010.09.27-08:33+0000) multi-call binary

Starting pid 301, console /dev/console: '/etc/init.d/rcS'
120+0 records in
120+0 records out
Welcome to Realtek Rescue Linux for PhotoViewer
mount: Mounting /dev/cdroms/cdrom0 on /mnt/usbmounts/cdrom failed: No such device
mount: Mounting /dev/hda1 on /mnt/usbmounts/hda1 failed: No such file or directory
mount: Mounting /dev/hda1 on /mnt/usbmounts/hda1 failed: No such file or directory
mount: Mounting /dev/hda1 on /mnt/usbmounts/hda1 failed: No such file or directory

>>>>>> loader start! (Sep 27 2010:16:34:24, version=00.01.01)

Please press Enter to activate this console. usb 2-2: new full speed USB device using ohci_hcd and address 2

#@# cfyeh-debug USBPHY_SetReg_Default_33_port(239) port 2 dr 7

Hotplug: device "ram0" is skipped.
Hotplug: device "loop0" is skipped.
Hotplug: device "loop1" is skipped.
Hotplug: device "loop2" is skipped.
Hotplug: device "loop3" is skipped.
Hotplug: device "loop4" is skipped.
Hotplug: device "loop5" is skipped.
Hotplug: device "loop6" is skiusb 2-2: not running at top speed; connect to a high speed hub

pped.
Hotplug: device "loop7" is skipped.
Hotplug: device "mtdblock0" is skipped.
scsi1 : SCSI emulation for USB Mass Storage devices

Vendor: Generic Model: Flash Disk Rev: 8.07

Type: Direct-Access ANSI SCSI revision: 02

modprobe: module sd_mod not found.
modprobe: failed to load module sd_mod
Vendor: Generic- Model: Multi-Card Rev: 1.00

Type: Direct-Access ANSI SCSI revision: 00

SCSI device sda: 7880704 512-byte hdwr sectors (4035 MB)

sda: Write Protect is off

sda: assuming drive cache: write through

disk->capacity:0x8039a75000000001

SCSI device sda: 7880704 512-byte hdwr sectors (4035 MB)

sda: Write Protect is off

sda: assuming drive cache: write through

disk->capacity:0x8039a75000000001

/dev/scsi/host0/bus0/target0/lun0:modprobe: module sd_mod not found.
modprobe: failed to load module sd_mod


[cfyeh-hack] msdos_partition(411) partition->boot_ind = 0x6f (should be 0x0 or 0x80)


[cfyeh-hack] msdos_partition(411) partition->boot_ind = 0x69 (should be 0x0 or 0x80)


[cfyeh-hack] msdos_partition(411) partition->boot_ind = 0x73 (should be 0x0 or 0x80)


[cfyeh-hack] msdos_partition(411) partition->boot_ind = 0x74 (should be 0x0 or 0x80)

[cfyeh-hack] msdos_partition(423) partition->boot_ind fail 4 times !!!

data[0] 0x0 signature[0] 0xbabeface

data[1] 0x0 signature[1] 0xdeadbeef

unknown partition table

Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0

Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0

rmdir: `/var/lock/hotplug/mount_tmp/.sda': No such file or directory
mount: Mounting /dev/scsi/host0/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: No such device
mount: Mounting /dev/scsi/host0/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: Invalid argument
Hotplug: "sda" has no partition.
Hotplug: mount -t ufsd -o ro,sparse -o nls=utf8 -o umask=0 /dev/scsi/host0/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
Hotplug: mount -t ntfs -o ro -o nls=utf8 -o umask=0 /dev/scsi/host0/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
Hotplug: mount -t vfat -o ro,shortname=winnt -o utf8 -o umask=0 /dev/scsi/host0/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 0
Hotplug: Mount "sda" successfully.
command: tar -xaOf /mnt/usbmounts/sda/install.img install_a > /install_a
tar: memory exhausted
tar: Short header
loader_a.c:verona_load_func:1268 Can not execute command, tar -xaOf /mnt/usbmounts/sda/install.img install_a > /install_a!
command: tar -xOf /mnt/usbmounts/sda/install.img install_a > /install_a
AVHDD Verona ins***128MB version...

taller (src rev: 0.96b)......Oct Memory address 0x40000000

10 2011 16:29:5Freeing memory...

7
opt_str=(null) , tgt_dev=(null), compress_string=(null)
pactry_to_free_pages: free 527

kage_file_path=/mnt/usbmounts/sda/install.img
****************try_to_free_pages: free 327

**************************
call pli_init
pli initialization...
try_to_free_pages: free 16

try_to_free_pages: free 0

done (870 pages freed)

try_to_free_pages: free 0

+++ ALLOC index: 20480 order: 8

1. start remap DVR zone 87000000(80482000) 256...

map_done is 0...

start[0-3] = {7001a500, 7001a504, 7001a508, 7001a50c}
end[0-3] = {7001a510, 7001a514, 7001a518, 7001a51c}
package_file_path: /mnt/usbmounts/sda/install.img
In my system...
version: amp_r5_mos
In my system...
[time] t=000.198
**chip_id = 1185
chip_id&0xF =0x5
SB2 DEBUG CONTROL(0)= 0x0 --> 0x0
SB2 DEBUG CONTROL(1)= 0x0 --> 0x0
SB2 DEBUG CONTROL(2)= 0x0 --> 0x0
SB2 DEBUG CONTROL(3)= 0x0 --> 0x0
SB2 DEBUG CONTROL(4)= 0x0 --> 0x0
SB2 DEBUG CONTROL(5)= 0x0 --> 0x0
SB2 DEBUG CONTROL(6)= 0x0 --> 0x0
SB2 DEBUG CONTROL(7)= 0x0 --> 0x0
SB2 INT = 0x0 --> 0x0
SB2 start addr(0)= 0x147aa3e9 --> 0x0
SB2 end addr(0)= 0x55d7308 --> 0x0
SB2 start addr(1)= 0x687daf9 --> 0x0
SB2 end addr(1)= 0xaa86742 --> 0x0
SB2 start addr(2)= 0x1321812d --> 0x0
SB2 end addr(2)= 0x154818 --> 0x0
SB2 start addr(3)= 0x2d9cb15 --> 0x0
SB2 end addr(3)= 0x3c4831b --> 0x0
SB2 start addr(4)= 0x1eb40578 --> 0x0
SB2 end addr(4)= 0x60e148b --> 0x0
SB2 start addr(5)= 0x7d79942 --> 0x0
SB2 end addr(5)= 0x17965514 --> 0x0
SB2 start addr(6)= 0x1e288b90 --> 0x0
SB2 end addr(6)= 0x1042002 --> 0x0
SB2 start addr(7)= 0xa52ca99 --> 0x0
SB2 end addr(7)= 0xe960f3c --> 0x0
IS_CHIP(MARS)
Mars...
5280 wait
got .//video_firmware.install.bin
video start addr, ptr=0x4d800000
disk->capacity:0x3500000001

Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0

Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0

video image size, cnt=1623760

audio_addr = 0xb081

video_addr = 0x808d

sleep for 3 seconds...
rmdir: `/var/lock/hotplug/mount_tmp/.sdb': No such file or directory
mount: Mounting /dev/scsi/host1/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sdb failed: No such device

Calling pli_rese[RPC]open for RPC ioctl...

tRPC()...
[RPC]start reset...

[RPC]done...


Release HW Semaphore.
In my system...

Got encoding system: 1 (NTSC)
call initRPCProxy... done.
call getTVE... done.
call prepareCLNT... done.
disk->capacity:0x3500000001

mount: Mounting /dev/scsi/host1/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sdb failed: No medium found
disk->capacity:0x3500000001

mount: Mounting /dev/scsi/host1/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sdb failed: No medium found
disk->capacity:0x3500000001

mount: Mounting /dev/scsi/host1/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sdb failed: No medium found
mount: Mounting /var/lock/hotplug/mount_tmp/.sdb on /tmp/usbmounts/sdb failed: Invalid argument
Hotplug: "sdb" has no partition.
Hotplug: mount -t ufsd -o ro,sparse -o nls=utf8 -o umask=0 /dev/scsi/host1/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sdb ret: 255
Hotplug: mount -t ntfs -o ro -o nls=utf8 -o umask=0 /dev/scsi/host1/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sdb ret: 255
Hotplug: mount -t vfat -o ro,shortname=winnt -o utf8 -o umask=0 /dev/scsi/host1/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sdb ret: 255
Hotplug: mount -t ext3 -o ro /dev/scsi/host1/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sdb ret: 255
Hotplug: Mount --move "/tmp/usbmounts/sdb" fail.
ASUS O!Play R3 (amp_r12.5_vrtn)
eugeny13
 
Posts: 32
Joined: 02 Oct 2010, 02:38

Re: Asus O!Play mini

Postby FarVoice » 13 Oct 2011, 13:20

eugeny13 wrote:привет.не могу добавить пишет Расширение log запрещено администратором

зажми в zip и прицепи к мессажду
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: Asus O!Play mini

Postby FarVoice » 13 Oct 2011, 13:24

это лог попытки прошивки нашей amp_r5_mos ?
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: Asus O!Play mini

Postby eugeny13 » 13 Oct 2011, 13:35

привет.вот.может объем большой??
Attachments
putty.rar
(5.53 KiB) Downloaded 224 times
ASUS O!Play R3 (amp_r12.5_vrtn)
eugeny13
 
Posts: 32
Joined: 02 Oct 2010, 02:38

Re: Asus O!Play mini

Postby FarVoice » 13 Oct 2011, 13:50

аха. дрова видео не подходят... Будем думать...
А пока зашейся родной, зайди по шнурку , сделай следующие команды и результаты сюда:
cat /proc/nandinfo
free
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: Asus O!Play mini

Postby FarVoice » 13 Oct 2011, 13:54

И ещё - вайфай свисток есть? И какой?
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: Asus O!Play mini

Postby eugeny13 » 13 Oct 2011, 14:06

привет.может я не правильно делал.через esc потом ввел команды.D-link dwa 131.правда ещё не пришел.заказал.
Attachments
putty.rar
(671 Bytes) Downloaded 233 times
ASUS O!Play R3 (amp_r12.5_vrtn)
eugeny13
 
Posts: 32
Joined: 02 Oct 2010, 02:38

Re: Asus O!Play mini

Postby FarVoice » 13 Oct 2011, 14:23

нет :0 надо без esc :) По esc ты попадаешь в реалтек монитор.
А надо - в линукс.
Делаем так: загружаешься , дожидаешься, когда появляется на телевизоре главное меню, потом заходишь путти, давишь два раза ввод
даёшь следующие команды:
stopall
cat /proc/nandinfo
free

лог высылаешь.
Плеер выключаешь-включаешь кабелем питания:)
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: Asus O!Play mini

Postby eugeny13 » 13 Oct 2011, 14:30

привет.при нажатии ввод все равно бежит дальше
Attachments
putty.rar
(1.27 KiB) Downloaded 234 times
ASUS O!Play R3 (amp_r12.5_vrtn)
eugeny13
 
Posts: 32
Joined: 02 Oct 2010, 02:38

PreviousNext

Return to ASUS

Who is online

Users browsing this forum: No registered users and 15 guests