Asus O!Play Mini (RTD 1055)

Asus O!Play Mini (RTD 1055)

Postby eugeny13 » 09 Oct 2011, 18:21

Привет.А можно ли к Asus O!Play mini прикрутить moServices? Хотя бы 2v.Или ето его убьет.Зарание СПАСИБО...
ASUS O!Play R3 (amp_r12.5_vrtn)
eugeny13
 
Posts: 32
Joined: 02 Oct 2010, 02:38

Re: Asus O!Play mini

Postby FarVoice » 09 Oct 2011, 18:25

eugeny13 wrote:Привет.А можно ли к Asus O!Play mini прикрутить moServices? Хотя бы 2v.Или ето его убьет.Зарание СПАСИБО...

главное - добавить к минику сетевой адаптер :)
А по железу там пойдёт и mos2 и mos3 - они ресурсов немного жрут. Только место на флеше.
Попробуйте прошить что-нить типа HD2_11206_rev6b и сунуть в него вайфай...
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: Asus O!Play mini

Postby jossy » 09 Oct 2011, 18:28

FarVoice wrote:
eugeny13 wrote:Привет.А можно ли к Asus O!Play mini прикрутить moServices? Хотя бы 2v.Или ето его убьет.Зарание СПАСИБО...

главное - добавить к минику сетевой адаптер :)
А по железу там пойдёт и mos2 и mos3 - они ресурсов немного жрут. Только место на флеше.
Попробуйте прошить что-нить типа HD2_11206_rev6b и сунуть в него вайфай...

Тоже очень интересен результат ! Отпишитесь потом...
P.S. Правда через консоль прошивать придётся... ;)
Last edited by jossy on 09 Oct 2011, 18:30, edited 1 time in total.
User avatar
jossy
 
Posts: 453
Joined: 23 Mar 2011, 19:21

Re: Asus O!Play mini

Postby eugeny13 » 09 Oct 2011, 18:29

спасибо
ASUS O!Play R3 (amp_r12.5_vrtn)
eugeny13
 
Posts: 32
Joined: 02 Oct 2010, 02:38

Re: Asus O!Play mini

Postby eugeny13 » 13 Oct 2011, 04:37

привет.пробовал прошить через консоль разными прошивкам,не шьёт.а родная шьётся.
ASUS O!Play R3 (amp_r12.5_vrtn)
eugeny13
 
Posts: 32
Joined: 02 Oct 2010, 02:38

Re: Asus O!Play mini

Postby FarVoice » 13 Oct 2011, 11:28

eugeny13 wrote:привет.пробовал прошить через консоль разными прошивкам,не шьёт.а родная шьётся.

лог неудачной прошивки HD2_11206_rev6b и последующей загрузки системы можно?
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: Asus O!Play mini

Postby eugeny13 » 13 Oct 2011, 11:48

привет.к смоему стыду я не умею снимать лог.
Лог | +
hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> hub : individual port power switching
> hub : individual port over-current protection
> [cfyeh] set PPE = 0
> [usb_param] setting for jupiter
> #######[cfyeh-debug] USBPHY_Register_Setting(901) jupiter B.2
> [usb_param] set port two for host!
> #@# cfyeh-debug USBPHY_SetReg_Default_33_port(239) port 1 dr 1
> #@# cfyeh-debug USBPHY_SetReg_Default_33_port(239) port 2 dr 1
> #@# cfyeh-debug USBPHY_SetReg_Default_39(418) tx_delay 2
[usb1_param] usbphy reg 32, set sh = 0x8, get sh = 0x8, 4bit
> > [usb1_param] usbphy reg 35, set src = 0x2, get src = 0x2, 3bit
> [usb1_param] usbphy reg 36, set senh = 0x9, get senh = 0x9, 4bit
> [usb1_param] usbphy reg 32, set sen = 0x9, get sen = 0x9, 4bit
> [usb1_param] usbphy reg 33, set dr = 0x1, get dr = 0x1, 3bit
> [usb1_param] usbphy reg 31, set sr = 0x7, get sr = 0x7, 3bit
> [usb1_param] usbphy reg 30, set cp = 0x1, get cp = 0x1, 3bit
> [usb1_param] usbphy reg 30, set sc = 0x1, get sc = 0x1, 4bit
> [usb2_param] usbphy reg 32, set sh = 0x8, get sh = 0x1, 4bit
> [usb2_param] usbphy reg 35, set src = 0x2, get src = 0x0, 3bit
> [usb2_param] usbphy reg 36, set senh = 0x9, get senh = 0x2, 4bit
> [usb2_param] usbphy reg 32, set sen = 0x9, get sen = 0x2, 4bit
> [usb2_param] usbphy reg 33, set dr = 0x1, get dr = 0x1, 3bit
> [usb2_param] usbphy reg 31, set sr = 0x7, get sr = 0x1, 3bit
> [usb2_param] usbphy reg 30, set cp = 0x1, get cp = 0x1, 3bit
> [usb2_param] usbphy reg 30, set sc = 0x1, get sc = 0x4, 4bit
> ohci_hcd ohci_hcd: OHCI Host Controller
> ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2
> ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400
> hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
> > hub : no power switching (usb 1.0)
> hub : no over-current protection
> Initializing USB Mass Storage driver...
> usb 1-1: new high speed USB device using ehci_hcd and address 2
> ###################################################################
> [cfyeh-test] usb_set_configuration(1454)
> Don't support this usb device or don't insert correct module yet!!!
> bus_id 1-1:1.0 (config #1, interface 0)
> ###################################################################
> scsi0 : SCSI emulation for USB Mass Storage devices
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> #######[cfyeh-debug] dwc_otg_driver_init(900) for otg device
> Setting registers , Enable OTG
> dwc_otg: version 2.60a 22-NOV-2006
> DWC_otg: Shared Tx FIFO mode
> i2c /dev entries driver
> [I2C0] i2c speed changed to 100 KHz
> I2C0 Bus Status Check.... OK
===> ======================
> = VER : 2.1b
> =========================
DWC_otg: USB RESET
> > = PHY : 0
> = MODE: MARS/JUPITER
> = SPD : 100
> = SAR : 0x024 (7 bits)
> = TX FIFO DEPTH : 32
> = RX FIFO DEPTH : 32
> = FIFO THRESHOLD: 4
> = BUS JAM RECORVER 3: ON
= NON STOP WRITE : OFF
= GPIO RW SUPPORT : ON
> > > = I2C DELAY : OFF
> =========================
> [I2C1] i2c speed changed to 100 KHz
> I2C1 Bus Status Check.... OK
> =========================
> = VER : 2.1b
> =========================
> = PHY : 1
> = MODE: MARS/JUPITER
> = SPD : 100
> = SAR : 0x024 (7 bits)
> = TX FIFO DEPTH : 32
> = RX FIFO DEPTH : 32
> = FIFO THRESHOLD: 4
> = BUS JAM RECORVER 3: ON
> = NON STOP WRITE : OFF
> = GPIO RW SUPPORT : ON
> = I2C DELAY : OFF
> =========================
Freeing prom memory: 0kb freed
> > Reclaim bootloader memory from 80010000 to 800f0000
> Freeing unused kernel memory: 440k freed
init started: BusyBox v1.1.3 (2010.09.27-08:33+0000) multi-call binary
Starting pid 301, console /dev/console: '/etc> > /init.d/rcS'
120+0 records in
120+0 records out
> > > Welcome to Realtek Rescue Linux for PhotoViewer
mount: Mounting /dev/cdroms/cdrom0 on /mnt/usbmounts/cdrom failed: No such device
mount: Moun> > ting /dev/hda1 on /mnt/usbmounts/hda1 failed: No such file or directory
mount: Mounting /dev/hda1 on /mnt/usbmounts> /hda1 failed: No such file or directory
mount: Mounting /dev/hda1 on /mnt/usbmounts/hda1 failed: No such fil> e or directory

>>>>>> loader start! (Sep 27 2010:16:34:24, version=00.01.01)

> > > > Please press Enter to activate this console. usb 2-2: new full speed USB device using ohci_hcd and address 2
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(239) port 2 dr 7
> > Hotplug: device "ram0" is skipped.
Hotplug: device "loop0" is skipped.
Hotplug: device "loop1" is skipped.
> > > Hotplug: device "loop2" is skipped.
> Hotplug: device "loop3" is skipped.
> Hotplug: device "loop4" is skipped.
Hotplug: device "loop5" is skipped.
Hotplug: device "loop6" is > > skiusb 2-2: not running at top speed; connect to a high speed hub
pped.
> > Hotplug: device "loop7" is skipped.
> Hotplug: device "mtdblock0" is skipped.
scsi1 : SCSI emulation for USB Mass Storage d> evices
Vendor: Generic Model: Flash Disk Rev: 8.07
Type: Direct-Access > > ANSI SCSI revision: 02
modprobe: module sd_mod not found.
> > modprobe: failed to load module sd_mod
Vendor: Generic- Model: Multi-> Card Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
> > SCSI device sda: 7880704 512-byte hdwr sectors (4035 MB)
sda: Write Protect is off
> > sda: assuming drive cache: write through
disk->capacity:0x> 8039a75000000001
SCSI device sda: 7880704 512-byte hdwr sectors (4035 MB)
> > sda: Write Protect is off
> sda: assuming drive cache: write through
disk->capacity:0x8039a75000000001
/dev/> > scsi/host0/bus0/target0/lun0:modprobe: module sd_mod not found.
modprobe: failed to load module sd_mod
> >
> [cfyeh-hack] msdos_partition(411) partition->boot_ind = 0x6f (should be 0x0 or 0x80)

> > [cfyeh-hack] msdos_partition(411) partition->boot_ind = 0x69 (should be 0x0 or 0x80)

> > [cfyeh-hack] msdos_partition(411) partition->boot_ind = 0x73 (should be 0x0 or 0x80)

[cfyeh-hack] msd> > os_partition(411) partition->boot_ind = 0x74 (should be 0x0 or 0x80)
[cfyeh-hack] msdos_partition(423) partition> ->boot_ind fail 4 times !!!
data[0] 0x0 signature[0] 0xbabeface
data[1] 0x0 signature[1] 0xde> > adbeef
> unknown partition table
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0> > at scsi0, channel 0, id 0, lun 0, type 0
rmdir: `/var/lock/hotplug/mount_tmp/.sda': No such file or directory
moun> -sh: /var/lock/hotplug/mount_tmp/.sda: No such file or directory
mount: Mounting /dev/scsi/host0/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: No such device
mount: Mounting /dev/scsi/host0/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: Invalid argument
Hotplug: "sda" has no partition.
Hotplug: mount -t ufsd -o ro,sparse -o nls=utf8 -o umask=0 /dev/scsi/host0/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
Hotplug: mount -t ntfs -o ro -o nls=utf8 -o umask=0 /dev/scsi/host0/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
Hotplug: mount -t vfat -o ro,shortname=winnt -o utf8 -o umask=0 /dev/scsi/host0/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 0
Hotplug: Mount "sda" successfully.
disk->capacity:0x3500000001
Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
rmdir: : not found
-sh: rmdir:: not found
# t: Mounting /dev/scsi/host0/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: No such device
-sh: mount:: not found
# mount: Mounting /dev/scsi/host0/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: Invalid argument
Hotplug: "sda" has no partition.
Hotplug: mount -t ufsd -o ro,sparse -o nls=utf8 -o umask=0 /dev-sh: mount:: not found
# -sh: Hotplug:: not found
# /scsi/host0/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
Hotplug: mount -t ntfs -o ro -o-sh: Hotplug:: not found
# nls=utf8 -o umask=0 /dev/scsi/host0/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
Hotplug-sh: Hotplug:: not found
# : mount -t vfat -o ro,shortname=winnt -o utf8 -o umask=0 /dev/scsi/host0/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 0
Hotplug: Mount "sda" successfully.
disk->capacity:0x3500000001
Attached scsi removable disk-sh: Hotplug:: not found
# -sh: Hotplug:: not found
# -sh: disk-: not found
# sdb at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
-sh: Attached: not found
# -sh: Attached: not found
# rmdir: `/var/lock/hotplug/mount_tmp/.sdb': No such file or directory
> mount: Mounting /dev/scsi/host1/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sdb failed: No such device
> disk->capacity:0x3500000001
> mount: Mounting /dev/scsi/host1/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sdb failed: No medium found
> disk->capacity:0x3500000001
> mount: Mounting /dev/scsi/host1/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sdb failed: No medium found
> disk->capacity:0x3500000001
> mount: Mounting /dev/scsi/host1/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sdb failed: No medium found
> mount: Mounting /var/lock/hotplug/mount_tmp/.sdb on /tmp/usbmounts/sdb failed: Invalid argument
> Hotplug: "sdb" has no partition.
> Hotplug: mount -t ufsd -o ro,sparse -o nls=utf8 -o umask=0 /dev/scsi/host1/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sdb ret: 255
> Hotplug: mount -t ntfs -o ro -o nls=utf8 -o umask=0 /dev/scsi/host1/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sdb ret: 255
> Hotplug: mount -t vfat -o ro,shortname=winnt -o utf8 -o umask=0 /dev/scsi/host1/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sdb ret: 255
> Hotplug: mount -t ext3 -o ro /dev/scsi/host1/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sdb ret: 255
> Hotplug: Mount --move "/tmp/usbmounts/sdb" fail.
>
> Hotplug: Mount --move "/tmp/usbmounts/sdb" fail.

и висит.пробовал прошить ICONBIT hds8w прошивает но не до конца. на нем чип RTD 1055 dd.думал типа этого http://forum.iconbit.ru/viewtopic.php?f=23&t=5783
ASUS O!Play R3 (amp_r12.5_vrtn)
eugeny13
 
Posts: 32
Joined: 02 Oct 2010, 02:38

Re: Asus O!Play mini

Postby eugeny13 » 13 Oct 2011, 11:59

а это когда шью от hds8w
Лог | +
1. start remap DVR zone 87100000(805c6000) 128...
map_done is 0...
Video DebugMem PVIDEO_RPC_SetDebugMemory Called!+++ ALLOC index: 20864 order: 7
hysical Address 1. start remap DVR zone 87180000(805c7000) 128...
= 0xadec00
map_done is 0...
+++ ALLOC index: 21504 order: 8
1. start remap DVR zone 87400000(805cc000) 256...
map_done is 0...
[AUDIO WARNING]
no more memory , do Remote Malloc. Size 0x00186008
+++ ALLOC index: 22016 order: 9
1. start remap DVR zone 87600000(805d0000) 512...
map_done is 0...
[AUDIO WARNING]
no more memory , do Remote Malloc. Size 0x00186008
+++ ALLOC index: 22528 order: 9
1. start remap DVR zone 87800000(805d4000) 512...
map_done is 0...
-------------------
Audio Version = 332479
Common Version = 328765
Build Date = Aug 25 2010
Build Time = 17:55:17
Note =
-------------------
ClassifyBonding DD 0x00000002



[Video Firmware Version] 335105
[Video Binary Built on] Sep 14 2010 14:31:20

WARNING: This is a binary for testing not a binary for release!!
Global compile options:
LINUX_32M VBM_DIMENSION_INFO
BOARD_BUILD



+++ ALLOC index: 16384 order: 12
1. start remap DVR zone 86000000(805a4000) 4096...
map_done is 0...
+++ ALLOC index: 23552 order: 10
1. start remap DVR zone 87c00000(805dc000) 1024...
map_done is 0...
+++ ALLOC index: 21760 order: 3
1. start remap DVR zone 87500000(805ce000) 8...
map_done is 0...
+++ ALLOC index: 12288 order: 12
1. start remap DVR zone 85000000(80584000) 4096...
map_done is 0...
+++ ALLOC index: 8192 order: 12
1. start remap DVR zone 84000000(80564000) 4096...
map_done is 0...
VBM: configured to SD!
[BONDING] ac3_dts_ddp dec= 0x00000000
[BONDING] ac3_dts_ddp dec= 0x00000000
dac's key = 0x00000001 (1 : has, 0: no key)
[BONDING] MLP ret= 0x00010000, key= 0x00000001, HBR= 0x00000001, dac= 0x00000000
dac's key = 0x00000001 (1 : has, 0: no key)
[BONDING] ac3_dts_ddp dec= 0x00000000
dac's key = 0x00000001 (1 : has, 0: no key)
[BONDING] DTSHD ret= 0x00010001, getkey= 0x00000001, HBR = 0x00000001, dac= 0x00000000dac's key = 0x00000001 (1 : has, 0: no key)
dac's key = 0x00000000 (1 : has, 0: no key)
board = 1 !, if -1, this board has illegal ID
file is (AC3,DTS,WMA) (0,1,0)
Do you have key?(0 = no!) 0
Bonding option process 0x0000001b to AUDIO_UNKNOWN_TYPE !!!
dac's key = 0x00000000 (1 : has, 0: no key)
board = 1 !, if -1, this board has illegal ID
file is (AC3,DTS,WMA) (0,1,0)
Do you have key?(0 = no!) 0
Bonding option process 0x0000001c to AUDIO_UNKNOWN_TYPE !!!
dac's key = 0x00000000 (1 : has, 0: no key)
board = 1 !, if -1, this board has illegal ID
file is (AC3,DTS,WMA) (0,1,0)
Do you have key?(0 = no!) 0
Bonding option process 0x0000001d to AUDIO_UNKNOWN_TYPE !!!
dac's key = 0x00000000 (1 : has, 0: no key)
board = 1 !, if -1, this board has illegal ID
file is (AC3,DTS,WMA) (0,0,1)
Do you have key?(0 = no!) 0
Bonding option process 0x00000023 to AUDIO_UNKNOWN_TYPE !!!
High = 0x00000000, Low = 0x03c1b7fe
The following Format is supported:
MPEG
AC3
LPCM
DTS
WMA
AAC
VORBIS
DV
MLP (TrueHD)
DDP (AC3+, EAC3)
WMA Pro
MP4 LC-AAC
MP4 HE-AAC
RAW AAC
ADPCM
FLAC
A Law PCM
u Law PCM
[VIDEO Capability]HighWord 0xffffffff, LowWord 0xffffffff
Error in threshold value: 0...
WatchDog does not receive signal for 2 seconds, value: 0
Error in threshold value: 0...
WatchDog does not receive signal for 2 seconds, value: 0
Error in threshold value: 0...
WatchDog does not receive signal for 2 seconds, value: 0
Error in threshold value: 0...
WatchDog does not receive signal for 2 seconds, value: 0
Error in threshold value: 0...
WatchDog does not receive signal for 2 seconds, value: 0
[HDMI]: Set AVMute
[HDMI]: JUPITER [I2C0] i2c speed changed to 50 KHz
HDMI is running...
[HDMI]: Disable HDCP
[HDMI]: Set I2C Speed = 50 kHz and increase i2c pull-low strength.
[HDMI]: Rx status = 0
[HDMI]: Hotplug Change !!! -1 -> 0
+++ ALLOC index: 4096 order: 11
1. start remap DVR zone 83000000(80544000) 2048...
map_done is 0...
abstractap semid=0
semctl ret=0[DataObject.cpp 1352] SQL ERROR 8 : ~~SetVideoStandard: fmt 7 ped 1 prog 0
attempt to write a readonly database
[DataObject.cpp,1426] error : 8 ,attempt to write a readonly database SQL :PRAGMA default_cache_size = 650;

(TVE) TVE_DAC_mode 0!! ~~comp 1, ch2 0
~~TVE standard#
###### - script pParam: rss_file://./scripts/setup/init.rss
In my system...
WARNING[2]:TVE i-underflow @ line 0
WARNING[2]:TVE p-underflow @ line 0
WARNING[2]:TVE h-underflow @ line 0
--------------- [IMSAP.cpp][IMSAPInit_one][4181]: internal hdd not found ----------------
*********** in init, create Table ***********
############### m_bIsActivate = 1
Error opening file image/IMAGE_NEWRSS_MENU_BTHALFFOC.bmp.
create image [image/IMAGE_NEWRSS_MENU_BTHALFFOC.bmp] error!!!
[DrawBitmap.cpp:295] bitmap header read fail....................
[DrawBitmap.cpp:401] bitmap header read fail.......(./scripts/setup/).......
create image [./scripts/setup/] error!!!
[DrawBitmap.cpp:295] bitmap header read fail....................
[DrawBitmap.cpp:401] bitmap header read fail.......(./scripts/setup/).......
create image [./scripts/setup/] error!!!
[Script] page title is $[INIT_SETUP]
NTP, contacting time.nist.gov for time
[IMSAP.cpp][Activate][1204]: Create loadmedia thread done
[AbstractAP.cpp,1388,Init()] do nothing.
IN : /tmp/net
Create /tmp/net Ok!!!
[IMSAP.cpp][threadLoadMedia][1268]: Wait for condition variable
In my system...
[usb_param] setting for jupiter
#######[cfyeh-debug] USBPHY_Register_Setting(854) jupiter B.2
[usb_param] set port two for host!
[usb1_param] usbphy reg 32, set sh = 0x8, get sh = 0x8, 4bit
[usb1_param] usbphy reg 35, set src = 0x2, get src = 0x2, 3bit
[usb1_param] usbphy reg 36, set senh = 0x9, get senh = 0x9, 4bit
[usb1_param] usbphy reg 32, set sen = 0x9, get sen = 0x9, 4bit
[usb1_param] usbphy reg 33, set dr = 0x1, get dr = 0x1, 3bit
[usb1_param] usbphy reg 31, set sr = 0x7, get sr = 0x7, 3bit
[usb1_param] usbphy reg 30, set cp = 0x1, get cp = 0x1, 3bit
[usb1_param] usbphy reg 30, set sc = 0x1, get sc = 0x1, 4bit
[usb2_param] usbphy reg 32, set sh = 0x8, get sh = 0x1, 4bit
[usb2_param] usbphy reg 35, set src = 0x2, get src = 0x0, 3bit
[usb2_param] usbphy reg 36, set senh = 0x9, get senh = 0x2, 4bit
[usb2_param] usbphy reg 32, set sen = 0x9, get sen = 0x2, 4bit
[usb2_param] usbphy reg 33, set dr = 0x1, get dr = 0x1, 3bit
[usb2_param] usbphy reg 31, set sr = 0x7, get sr = 0x1, 3bit
[usb2_param] usbphy reg 30, set cp = 0x1, get cp = 0x1, 3bit
[usb2_param] usbphy reg 30, set sc = 0x1, get sc = 0x4, 4bit
ehci_hcd ehci_hcd: EHCI Host Controller
ehci_hcd ehci_hcd: new USB bus registered, assigned bus number 1
ehci_hcd ehci_hcd: irq 2, io mem 0xb8013000
ehci_hcd ehci_hcd: park 0
ehci_hcd ehci_hcd: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub : individual port power switching
hub : individual port over-current protection
[cfyeh] set PPE = 0
[usb_param] setting for jupiter
#######[cfyeh-debug] USBPHY_Register_Setting(854) jupiter B.2
[usb_param] set port two for host!
[usb1_param] usbphy reg 32, set sh = 0x8, get sh = 0x8, 4bit
[usb1_param] usbphy reg 35, set src = 0x2, get src = 0x2, 3bit
[usb1_param] usbphy reg 36, set senh = 0x9, get senh = 0x9, 4bit
[usb1_param] usbphy reg 32, set sen = 0x9, get sen = 0x9, 4bit
[usb1_param] usbphy reg 33, set dr = 0x1, get dr = 0x1, 3bit
[usb1_param] usbphy reg 31, set sr = 0x7, get sr = 0x7, 3bit
[usb1_param] usbphy reg 30, set cp = 0x1, get cp = 0x1, 3bit
[usb1_param] usbphy reg 30, set sc = 0x1, get sc = 0x1, 4bit
[usb2_param] usbphy reg 32, set sh = 0x8, get sh = 0x1, 4bit
[usb2_param] usbphy reg 35, set src = 0x2, get src = 0x0, 3bit
[usb2_param] usbphy reg 36, set senh = 0x9, get senh = 0x2, 4bit
[usb2_param] usbphy reg 32, set sen = 0x9, get sen = 0x2, 4bit
[usb2_param] usbphy reg 33, set dr = 0x1, get dr = 0x1, 3bit
[usb2_param] usbphy reg 31, set sr = 0x7, get sr = 0x1, 3bit
[usb2_param] usbphy reg 30, set cp = 0x1, get cp = 0x1, 3bit
[usb2_param] usbphy reg 30, set sc = 0x1, get sc = 0x4, 4bit
ohci_hcd ohci_hcd: OHCI Host Controller
ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2
ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub : no power switching (usb 1.0)
hub : no over-current protection
usb 1-1: new high speed USB device using ehci_hcd and address 2
In my system...
Error in threshold value: 0...
WatchDog does not receive signal for 2 seconds, value: 0
This is the current time: PowerUP_Done!!!
In my system...
scsi0 : SCSI emulation for USB Mass Storage devices
BOARD_RTD1055
at8 failed
ASUS O!Play R3 (amp_r12.5_vrtn)
eugeny13
 
Posts: 32
Joined: 02 Oct 2010, 02:38

Re: Asus O!Play mini

Postby FarVoice » 13 Oct 2011, 12:35

логи лучше убирать под спойлер - см. предыдущий пост :)
А логи снимать очень просто - в PuTTY есть опция записи лога в файл
Session - Logging и поставить галочку All session output

А попробуйте прошить http://www.farvoice.ru/upload/amp_r5_mos.zip
Это чистое ядро без GUI, т.е. общение с линухом только через терминал. Мне важно, встанет вообще наше ядро на 1055 или нет.
Если встанет, но тогда будем пробовать собрать прошивку с нашим ядром и вашим Гуём :)
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: Asus O!Play mini

Postby eugeny13 » 13 Oct 2011, 13:08

привет.пробовал fw_Htravel_XD_20110601_v202B_upd2 .включилось языковое меню.пульт не реагирует .
ASUS O!Play R3 (amp_r12.5_vrtn)
eugeny13
 
Posts: 32
Joined: 02 Oct 2010, 02:38

Next

Return to ASUS

Who is online

Users browsing this forum: No registered users and 15 guests