Люди, помогите... Похожая проблема после неудачной прошивки от iconbita. Родной буткод не известен. Следуя инструкции в вашей теме получил следующее:
?
s/d/g/c>
s/d/g/c>
s/d/g/c>s
Ymodem:
CCCCCCCCC
checksum:0x0000A3AE
crc32:0x051FC6FB, len:0x00000334hello world!
s/d/g/c>d
Ymodem:
CCCCCCCCCC
checksum:0x00213320
crc32:0x1130057E, len:0x0000D2C4
s/d/g/c>g
rtdsr v0.6, Copyright (c) 2011 Pete B. <xtreamerdev@gmail.com>
rtdsr comes with ABSOLUTELY NO WARRANTY.
This program is free software, you are welcome to redistribute it under
certain conditions. See http://www.gnu.org/licenses/gpl.html for details.
Configured with CPU:27.0MHz, RAM_BASE:0xa0500000, FLASH_BST:0xa0400000
Numeric parameters are to be provided in hexadecimal
rtdsr> yr
Ymodem rcv:
CCCCCC
read:bootloader.bin
crc32:0x33a2c8ae, len:0x00040000
rtdsr> fi
NAND Flash: Type:HY27UF082G2B, Size:256MB, PageSize:0x800, BlockSize:0x20000
rtdsr> m a0400000
a0400000 bb bb 23 23 23 23 23 23 23 23 00 00 ff 00 ff 00 ..########......
a0400010 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ................
a0400020 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ................
a0400030 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ................
a0400040 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ................
a0400050 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ................
a0400060 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ................
a0400070 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ................
a0400080 d0 ff ff 00 ff ff ff ff ff ff ff ff ff ff ff ff ................
a0400090 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a04000a0 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a04000b0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a04000c0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a04000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a04000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a04000f0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
rtdsr> fw 140000 40000
About to write 0x40000 bytes from RAM:0xa0500000 to Flash offset:0x00140000
If this is really what you want, press Y
bad block detected (0xa) - will try to erase it anyway
erasing block 0xa... success
bad block detected (0xb) - will try to erase it anyway
erasing block 0xb... success
writing block 0xa...............................................................
. success
writing block 0xb.! error: failed at page 0x2c1!
erasing block 0xb... success
.
Writing of Flash failed!
error -1 executing command
rtdsr>
Можно что-то сделать или перепаивать флешку?
Заранее спасибо.