Digma HDMP-300 (256mb) проблема с HDMI переходником

обо всём

Digma HDMP-300 (256mb) проблема с HDMI переходником

Postby uffik » 20 Jun 2015, 21:43

Может кто подскажет
Есть Digma HDMP-300 (256mb). прошил на moS3 и обновил до r15 , купил переходник с HDMI на VGA( 15-pin) подключил к монитору (1440x900).
При старте показал нормальную картинку бутлоадера "1080p Multimedia player", после тух. Разобрался - подпаял в плеере hotplug к +5v. Стал показывать.
Но такая беда показывает с оттенком фиолетового. Хотя при загрузки картинка нормальная.
Вопрос в студию:
-Это прошивка балуется?
-Можно ли изменить цветопередачу вручную?
Ниже конфа плеера:
"SysInfo" | +
Информация о системе
/bin/uname -a

Linux Venus 2.6.12.6-VENUS #AMP11 Wed Jul 31 16:23:50 MSD 2013 mips GNU/Linux


cat /proc/cpuinfo

system type : Realtek Venus
processor : 0
cpu model : MIPS 24K V7.8
BogoMIPS : 269.51
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes
ASEs implemented : mips16
VCED exceptions : not available
VCEI exceptions : not available


cat /proc/meminfo

MemTotal: 120684 kB
MemFree: 9116 kB
Buffers: 1756 kB
Cached: 24128 kB
SwapCached: 0 kB
Active: 15356 kB
Inactive: 17048 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 120684 kB
LowFree: 9116 kB
SwapTotal: 32 kB
SwapFree: 32 kB
Dirty: 0 kB
Writeback: 0 kB
Mapped: 16348 kB
Slab: 7568 kB
CommitLimit: 60372 kB
Committed_AS: 19664 kB
PageTables: 712 kB
VmallocTotal: 1048548 kB
VmallocUsed: 1012 kB
VmallocChunk: 1047436 kB


/sbin/lsmod

usbkbd 6336 0 - Live 0xc00aa000
usbhid 34992 0 - Live 0xc010c000
ohci_hcd 21904 0 - Live 0xc00ae000
ehci_hcd 43552 0 - Live 0xc008a000
sata_mars 22080 0 - Live 0xc005e000
libata 55696 1 sata_mars, Live 0xc0097000
venus_ir_new 13376 5 - Live 0xc0065000
x_io 3408 0 - Live 0xc005c000
cifs 284288 0 - Live 0xc00b9000
venus_gpio 10032 1 - Live 0xc0058000


/bin/ps -w

PID Uid VmSize Stat Command
1 root 2300 S init
2 root 0 SWN [ksoftirqd/0]
3 root 0 SW< [events/0]
4 root 0 SW< [khelper]
5 root 0 SW< [kthread]
6 root 0 SW< [kblockd/0]
7 root 0 SW [khubd]
8 root 0 SW [rpc-1]
9 root 0 SW [rpc-3]
10 root 0 SW [pdflush]
11 root 0 SW [pdflush]
13 root 0 SW< [aio/0]
12 root 0 SW [kswapd0]
15 root 0 SW [eth0]
16 root 0 SW [mtdblockd]
14 root 0 SW [kseriod]
23 root 2300 S init
24 root 2300 S init
27 root 2300 S init
30 root 2300 S init
45 root 0 SW< [cifsoplockd]
46 root 0 SW< [cifsdnotifyd]
51 root 2300 S /sbin/syslogd -s 128 -O /tmp/.log -n -m 0
52 root 2296 S /sbin/klogd -n
60 root 2312 S inetd
84 root 428 S /usr/local/etc/irfake/irfake4 -R -f /usr/local/etc/irfake/irfake.conf
91 root 0 SW< [loop0]
94 root 0 SW< [loop1]
121 root 2304 S /bin/sh /usr/local/etc/mos/bin/rebootd
142 root 1648 S N /usr/local/etc/mos/bin/vsftpd /usr/local/etc/mos/etc/vsftpd.conf
198 root 2300 S /bin/sh /usr/local/etc/mos/bin/captured
200 root 452 S /usr/local/sbin/RootApp -a /usr/local/etc/mos/etc/audio.bin 81b00000 -v /usr/local/etc/mos/etc/video.bin
199 root 2296 S cat /tmp/ir
207 root 0 SW< [sata_eh/0]
217 root 0 SW [scsi_eh_0]
218 root 0 SW [scsi_eh_1]
230 root 8176 S N /usr/local/etc/mos/bin/lighttpd -f /usr/local/etc/mos/etc/lighttpd.conf
233 root 18568 S N /usr/local/etc/mos/bin/php
235 root 452 S /usr/local/sbin/RootApp -a /usr/local/etc/mos/etc/audio.bin 81b00000 -v /usr/local/etc/mos/etc/video.bin
237 root 792m S < DvdPlayer
238 root 452 S /usr/local/sbin/RootApp -a /usr/local/etc/mos/etc/audio.bin 81b00000 -v /usr/local/etc/mos/etc/video.bin
244 root 792m S DvdPlayer
245 root 792m S N DvdPlayer
246 root 792m S N DvdPlayer
248 root 19132 S N /usr/local/etc/mos/bin/php
249 root 19132 S N /usr/local/etc/mos/bin/php
250 root 18592 S N /usr/local/etc/mos/bin/php
257 root 792m S DvdPlayer
258 root 792m S DvdPlayer
265 root 792m S DvdPlayer
266 root 792m S DvdPlayer
267 root 792m S DvdPlayer
268 root 792m S DvdPlayer
269 root 792m S DvdPlayer
270 root 792m S DvdPlayer
281 root 792m S DvdPlayer
282 root 792m S DvdPlayer
283 root 792m S DvdPlayer
284 root 792m S DvdPlayer
286 root 792m S DvdPlayer
287 root 792m S DvdPlayer
295 root 792m S DvdPlayer
296 root 792m S DvdPlayer
297 root 792m S N DvdPlayer
300 root 792m S DvdPlayer
307 root 792m S DvdPlayer
308 root 792m R DvdPlayer
309 root 792m S DvdPlayer
319 root 792m S DvdPlayer
320 root 792m S DvdPlayer
323 root 792m S DvdPlayer
324 root 792m S DvdPlayer
380 root 2300 S /sbin/udhcpc -p /var/lock/udhcpc_eth0.pid -t 15 -b -s /etc/udhcpc.script -i eth0
405 root 792m S DvdPlayer
430 root 792m S DvdPlayer
617 root 484 S /usr/local/etc/mos/bin/udpxy -p 8080 -m eth0 -B 262144 -H 8 -l /tmp/udpxy.log
1338 root 2296 S sleep 1
1339 root 2304 S N sh -c top -n 1
1340 root 1744 S N top -n 1
1343 root 2304 S N sh -c /bin/ps -w
1344 root 2304 R N /bin/ps -w


/bin/dmesg

Linux version 2.6.12.6-VENUS (vadmin@vadmin) (gcc version 3.4.4 mipssde-6.03.00-20051020) #AMP11 Wed Jul 31 16:23:50 MSD 2013
audio addr: 1b00000
CPU revision is: 00019378
Determined physical RAM map:
memory: 00100000 @ 00000000 (usable)
memory: 00419000 @ 00100000 (reserved)
memory: 015e7000 @ 00519000 (usable)
memory: 00500000 @ 01b00000 (reserved)
memory: 06000000 @ 02000000 (usable)
show info: max_low_pfn:32768
show info: min_low_pfn:1305
On node 0 totalpages: 32768
DMA zone: 8192 pages, LIFO batch:3
ZONE: DMA, PFN: 0
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
DVR zone: 24576 pages, LIFO batch:15
ZONE: DVR, PFN: 8192
Built 1 zonelists
Kernel command line: mtdparts=rtk_nand:24704k,220160k(/),4096k(/usr/local/etc),13184k rootfstype=yaffs2 root=31:01 console=ttyS0,115200n8r ip=192.168.0.9::192.168.0.254:255.0.0.0:::
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 256 (order: 8, 4096 bytes)
Estimate value: CPU frequency 405.02 MHz
Using 27.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 119576k/121756k available (3334k kernel code, 2112k reserved, 561k data, 144k init, 0k highmem)
Calibrating delay loop... 269.51 BogoMIPS (lpj=1347584)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
========== board id: 202 ==========
[INFO] neptune mode...
boot_param value: a0002800
mode: 1
Se logo mode to PAL
size: 1720
color1: 0x808010
color2: 0x807c65
color3: 0x9112cf
color4: 0x8080d9
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
se init module major number = 254
size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52...
[user land] CmdBuf virt addr = 80650000/a0650000, phy addr=00650000
Hello, Realtek TLB Mapper
AllocBP size: 294912 order: 7
<<>>
0: 0
1: 0
2: 0
3: 0
4: 0
5: 0
6: 0
7: 0
8: 0
9: 0
10: 0
11: 0
12: 6
Addr: 87000000, order: 12
Addr: 86000000, order: 12
Addr: 85000000, order: 12
Addr: 84000000, order: 12
Addr: 83000000, order: 12
Addr: 82000000, order: 12
squashfs: version 3.1 (2006/08/19) Phillip Lougher
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
YAFFS Driver Rev:292241 (2010-01-19)
YAFFS Driver is successfully installing.
Initializing Cryptographic API
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
io scheduler noop registered
RAMDISK driver initialized: 1 RAM disks of 128K size 1024 blocksize
loop: loaded (max 8 devices)
this MARS eth RX_OFFSET = 0x0
8139cplus: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
MAC address = 0x00.05.9E.91.5B.55
eth0: RTL-8139C+ at 0xb8016000, 00:05:9e:91:5b:55, IRQ 2
physmap flash device: 10000000 at fd00000
cp_hotplug
CFI: Found no phys_mapped_flash device at location zero
Realtek NAND Flash Driver Rev:317223 (2010-06-01)
One NAND02GW3B2D chip has 1 die(s) on board
nand part=NAND02GW3B2D, id=20da1095, device_size=268435456, chip_size=268435456, num_chips=1, isLastPage=0
[rtk_nand_scan_bbt] have created bbt B0, just loads it !!
[dump_BBT] Nand BBT Content
[0] (0, 1918, 0, 2047)
4 cmdlinepart partitions found on MTD device rtk_nand
RTK: using dynamic nand partition
Creating 4 MTD partitions on "rtk_nand":
0x00000000-0x01820000 : "Partition_000"
0x01820000-0x0ef20000 : "/"
0x0ef20000-0x0f320000 : "/usr/local/etc"
0x0f320000-0x10000000 : "Partition_003"
0x00000000-0x10000000 : "disc"
Realtek Nand Flash Driver is successfully installing.
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
[I2C0] i2c speed changed to 100 KHz
I2C0 Bus Status Check.... OK
=========================
= VER : 2.1b
=========================
= PHY : 0
= MODE: MARS/JUPITER
= SPD : 100
= SAR : 0x024 (7 bits)
= TX FIFO DEPTH : 8
= RX FIFO DEPTH : 8
= FIFO THRESHOLD: 4
= BUS JAM RECORVER 3: ON
= NON STOP WRITE : ON
= GPIO RW SUPPORT : ON
=========================
FATAL : I2C 1 pins have been occupied by PCI
Trying to free free IRQ3
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
Realtek Venus Power Management, (c) 2006 Realtek Semiconductor Corp.
cp_open
alloc rings cp->rxdesc_buf =0xa1aa4000 , cp->ring_dma=0x1aa4000
init_hw
init_hw finished
IP-Config: Complete:
device=eth0, addr=192.168.0.9, mask=255.0.0.0, gw=192.168.0.254,
host=192.168.0.9, domain=, nis-domain=(none),
bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
yaffs: dev is 32505857 name is "mtdblock1"
yaffs: Attempting MTD mount on 31.1, "mtdblock1"
RTK rtc cannot work.
yaffs: restored from checkpoint
VFS: Mounted root (yaffs2 filesystem) readonly.
Mounted devfs on /dev
Freeing prom memory: 0kb freed
Reclaim bootloader memory from 80020000 to 80100000
Freeing unused kernel memory: 144k freed
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
hotplug eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
x_io mod (C)Virtual, ver:1.0.0.4.
Old VenusIR driver found at 80491b58
Found venus_ir_cleanup_module() @ 0x8010861c
venus_ir_cleanup_module() called
New Venus IR driver loaded
set corepath: /tmp/hdd/volumes/HDD1/
libata version 1.12 loaded..
sata driver initial...2009/12/30 14:50
sata driver patched 2013/02/07 (Virtual)
mars_init_sata(1270)dev_addr:c00631f0
ata_device_add(4893)probe begin
scsi0 : SATA_DRV
sata dma reset
***128MB version...
Memory address 0x40000000
[RPC]open for RPC ioctl...
[RPC]start reset...
[RPC]done...
clear pli setting....
sata1: no device found (phy stat 00000000)
sata1: ata_bus_probe failed
scsi1 : SATA_DRV
sata dma reset
sata2: no device found (phy stat 00000000)
sata2: ata_bus_probe failed
***128MB version...
Memory address 0x40000000
+++ ALLOC index: 20480 order: 8
1. start remap DVR zone 87000000(805fa000) 256...
map_done is 0...
+++ ALLOC index: 20992 order: 9
1. start remap DVR zone 87200000(805fe000) 512...
map_done is 0...
+++ ALLOC index: 20736 order: 7
1. start remap DVR zone 87100000(805fc000) 128...
map_done is 0...
+++ ALLOC index: 20864 order: 7
1. start remap DVR zone 87180000(805fd000) 128...
map_done is 0...
+++ ALLOC index: 21504 order: 8
1. start remap DVR zone 87400000(80602000) 256...
map_done is 0...
+++ ALLOC index: 22016 order: 9
1. start remap DVR zone 87600000(80606000) 512...
map_done is 0...
+++ ALLOC index: 22528 order: 11
1. start remap DVR zone 87800000(8060a000) 2048...
map_done is 0...
[I2C0] i2c speed changed to 50 KHz
[I2C0] i2c speed changed to 50 KHz
Node 0, zone DMA 3 1 1 0 0 1 0 1 0 0 0 1 0
free pages: 2217
Node 0, zone DVR 1 1 0 0 1 0 0 0 0 0 0 1 2
free pages: 10259
cached size: 9345
try_to_free_pages: free 1017
Node 0, zone DMA 101 79 49 37 15 2 0 1 0 0 0 1 0
free pages: 3231
Node 0, zone DVR 32 16 11 5 4 1 0 0 0 0 0 1 2
free pages: 10484
cached size: 9120
+++ ALLOC index: 16384 order: 12
1. start remap DVR zone 86000000(805da000) 4096...
map_done is 0...
+++ ALLOC index: 12288 order: 10
1. start remap DVR zone 85000000(805ba000) 1024...
map_done is 0...
+++ ALLOC index: 21760 order: 3
1. start remap DVR zone 87500000(80604000) 8...
map_done is 8...
Node 0, zone DMA 89 69 42 29 14 3 2 1 0 0 0 1 0
free pages: 3251
Node 0, zone DVR 0 22 16 9 4 1 0 0 0 0 1 2 0
free pages: 5396
cached size: 9121
try_to_free_pages: free 0
Node 0, zone DMA 89 69 42 29 14 3 2 1 0 0 0 1 0
free pages: 3251
Node 0, zone DVR 0 22 16 9 4 1 0 0 0 0 1 2 0
free pages: 5396
cached size: 9121
+++ ALLOC index: 8192 order: 12
1. start remap DVR zone 84000000(8059a000) 4096...
map_done is 2014...
Node 0, zone DMA 80 69 42 29 14 3 2 1 0 0 0 1 0
free pages: 3242
Node 0, zone DVR 0 1 0 0 1 0 0 0 1 0 1 0 0
free pages: 1298
cached size: 9121
try_to_free_pages: free 15
Node 0, zone DMA 76 66 38 29 16 3 2 1 0 0 0 1 0
free pages: 3248
Node 0, zone DVR 3 3 0 1 1 0 0 0 1 0 1 0 0
free pages: 1313
cached size: 9089
+++ ALLOC index: 4096 order: 12
1. start remap DVR zone 83000000(8057a000) 4096...
map_done is 4096...
This is the current time: PowerUP_Done!!!
[usb_param] setting for mars
Setting for MARS-B
[usb_param] set port two for host!
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 1 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 2 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_39(417) tx_delay 1
[usb1_param] usbphy reg 32, set sh = 0x9, get sh = 0x9, 4bit
[usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
[usb2_param] usbphy reg 32, set sh = 0x9, get sh = 0x9, 4bit
[usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
ehci_hcd ehci_hcd: EHCI Host Controller
ehci_hcd ehci_hcd: new USB bus registered, assigned bus number 1
ehci_hcd ehci_hcd: irq 2, io mem 0xb8013000
ehci_hcd ehci_hcd: park 0
ehci_hcd ehci_hcd: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub : individual port power switching
hub : individual port over-current protection
[cfyeh] set PPE = 0
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[usb_param] setting for mars
Setting for MARS-B
[usb_param] set port two for host!
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 1 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 2 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_39(417) tx_delay 1
[usb1_param] usbphy reg 32, set sh = 0x9, get sh = 0x9, 4bit
[usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
[usb2_param] usbphy reg 32, set sh = 0x9, get sh = 0x9, 4bit
[usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
ohci_hcd ohci_hcd: OHCI Host Controller
ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2
ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub : no power switching (usb 1.0)
hub : no over-current protection
usb 2-1: new low speed USB device using ohci_hcd and address 2
###################################################################
[cfyeh-test] usb_set_configuration(1454)
Don't support this usb device or don't insert correct module yet!!!
bus_id 2-1:1.0 (config #1, interface 0)
###################################################################
###################################################################
[cfyeh-test] usb_set_configuration(1454)
Don't support this usb device or don't insert correct module yet!!!
bus_id 2-1:1.1 (config #1, interface 1)
###################################################################
input: USB HID v1.10 Keyboard [USB Keyboard] on usb-ohci_hcd-1
input: USB HID v1.10 Device [USB Keyboard] on usb-ohci_hcd-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
Algorithmics/MIPS FPU Emulator v1.5


/bin/busybox

BusyBox v1.18.5 (2013-03-02 23:17:45 MSK) multi-call binary.
Copyright (C) 1998-2009 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.

Usage: busybox [function] [arguments]...
or: busybox --list[-full]
or: function [arguments]...

BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use and BusyBox
will act like whatever it was invoked as.

Currently defined functions:
[, [[, acpid, add-shell, addgroup, adduser, adjtimex, ar, arp, arping,
ash, awk, basename, bash, blkid, blockdev, bootchartd, brctl, bunzip2,
bzcat, bzip2, cal, cat, catv, chat, chattr, chgrp, chmod, chown,
chpasswd, chpst, chroot, chrt, clear, cmp, cp, cpio, cryptpw, cttyhack,
cut, date, dc, dd, delgroup, deluser, depmod, devfsd, devmem, df,
dhcprelay, diff, dirname, dmesg, dnsd, dnsdomainname, dos2unix, dpkg,
dpkg-deb, du, dumpleases, echo, ed, egrep, eject, env, envdir,
envuidgid, ether-wake, expr, fakeidentd, false, fbset, fbsplash,
fdflush, fdformat, fdisk, fgrep, find, findfs, flock, fold, free,
freeramdisk, fsck.minix, fsync, ftpd, ftpget, ftpput, fuser, getopt,
getty, grep, gunzip, gzip, halt, hd, hdparm, head, hexdump, hostid,
hostname, httpd, hwclock, id, ifconfig, ifdown, ifenslave, ifplugd,
ifup, inetd, init, insmod, install, iostat, ip, ipaddr, ipcalc, ipcrm,
ipcs, iplink, iproute, iprule, iptunnel, kill, killall, killall5,
klogd, length, less, linux32, linux64, ln, logger, login, logname,
logread, losetup, ls, lsmod, lspci, lsusb, lzcat, lzma, lzop, lzopcat,
makedevs, man, md5sum, mesg, microcom, mkdir, mkdosfs, mkfifo,
mkfs.minix, mkfs.vfat, mknod, mkpasswd, mkswap, mktemp, modinfo,
modprobe, more, mount, mountpoint, mpstat, mt, mv, nameif, nbd-client,
nc, netstat, nice, nmeter, nohup, nslookup, ntpd, od, passwd, patch,
pgrep, pidof, ping, pipe_progress, pivot_root, pkill, pmap, poweroff,
powertop, printenv, printf, ps, pscan, pwd, raidautorun, rdate, rdev,
readlink, readprofile, realpath, reboot, remove-shell, renice, rev, rm,
rmdir, rmmod, route, rpm, rpm2cpio, rtcwake, run-parts, runlevel,
runsv, runsvdir, rx, script, scriptreplay, sed, seq, setarch, setsid,
setuidgid, sh, sha1sum, sha256sum, sha512sum, slattach, sleep, smemcap,
softlimit, sort, split, start-stop-daemon, stat, strings, stty, su,
sulogin, sum, sv, svlogd, swapoff, swapon, switch_root, sync, sysctl,
syslogd, tac, tail, tar, tcpsvd, tee, telnet, telnetd, test, tftp,
tftpd, time, timeout, top, touch, tr, traceroute, true, tty, ttysize,
tunctl, udhcpc, udhcpd, udpsvd, umount, uname, uncompress, unexpand,
uniq, unix2dos, unlzma, unlzop, unxz, unzip, uptime, usleep, uuencode,
vconfig, vi, vlock, volname, wall, watch, watchdog, wc, wget, which,
whoami, xargs, xz, xzcat, yes, zcat, zcip


cat /proc/mounts

rootfs / rootfs rw 0 0
/dev/root / yaffs2 rw,noatime 0 0
none /dev devfs rw 0 0
none /proc proc rw,nodiratime 0 0
devpts /dev/pts devpts rw 0 0
none /sys sysfs rw 0 0
/dev/mtdblock/2 /usr/local/etc yaffs2 rw,noatime 0 0
none /tmp ramfs rw 0 0
/dev/rd/0 /mnt/rd vfat rw,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1 0 0
/dev/root /usr/local/etc/mos yaffs2 rw,noatime 0 0
/dev/loop/0 /usr/local/bin squashfs ro 0 0
/dev/loop/1 /usr/local/bin/Resource squashfs ro 0 0
/dev/root /usr/local/bin/home_menu/scripts/HomeMenu_noDB.rss yaffs2 rw,noatime 0 0
/dev/root /usr/local/bin/guide_menu/scripts/GuideMenu_noDB.rss yaffs2 rw,noatime 0 0
/dev/root /usr/local/bin/home_menu/scripts/HomeMenu.rss yaffs2 rw,noatime 0 0
/dev/root /usr/local/bin/guide_menu/scripts/GuideMenu.rss yaffs2 rw,noatime 0 0


/bin/df -h

Filesystem Size Used Available Use% Mounted on
/dev/root 215.0M 76.9M 138.1M 36% /
/dev/mtdblock/2 4.0M 1.6M 2.4M 40% /usr/local/etc
/dev/rd/0 40.0K 40.0K 0 100% /mnt/rd
/dev/root 215.0M 76.9M 138.1M 36% /usr/local/etc/mos
/dev/loop/0 18.4M 18.4M 0 100% /usr/local/bin
/dev/loop/1 2.3M 2.3M 0 100% /usr/local/bin/Resource
/dev/root 215.0M 76.9M 138.1M 36% /usr/local/bin/home_menu/scripts/HomeMenu_noDB.rss
/dev/root 215.0M 76.9M 138.1M 36% /usr/local/bin/guide_menu/scripts/GuideMenu_noDB.rss
/dev/root 215.0M 76.9M 138.1M 36% /usr/local/bin/home_menu/scripts/HomeMenu.rss
/dev/root 215.0M 76.9M 138.1M 36% /usr/local/bin/guide_menu/scripts/GuideMenu.rss


/sbin/fdisk -l


/sbin/ifconfig

eth0 Link encap:Ethernet HWaddr 00:05:9E:91:5B:55
inet addr:192.168.0.103 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:178 errors:0 dropped:0 overruns:0 frame:0
TX packets:252 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:19772 (19.3 KiB) TX bytes:135899 (132.7 KiB)
Interrupt:2 Base address:0x6000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:64 errors:0 dropped:0 overruns:0 frame:0
TX packets:64 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5437 (5.3 KiB) TX bytes:5437 (5.3 KiB)


/sbin/route

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
169.254.0.0 * 255.255.0.0 U 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0


cat /etc/resolv.conf

nameserver 127.0.0.1
nameserver 80.254.108.198
nameserver 80.254.108.202
nameserver 80.254.108.194


set

HISTFILE='/tmp/.ash_history'
HISTSIZE='1000'
HOME='/'
HOSTNAME='Venus'
IFS='
'
LD_LIBRARY_PATH='/usr/local/etc/mos/lib:/lib'
MC_HOME='/usr/local/etc/mos/etc/.mc'
OPTIND='1'
PATH='/opt/sbin:/opt/bin:/usr/local/bin:/usr/local/sbin:/usr/local/etc/mos/bin:/sbin:/usr/sbin:/bin:/usr/bin'
PHP_FCGI_CHILDREN='3'
PPID='249'
PS1='\w \$ '
PS2='> '
PS4='+ '
PWD='/tmp/www'
SHELL='/bin/sh'
TERM='xterm-256color'
TERMINFO='/usr/local/etc/mos/share/terminfo'
TZ='MSK-3MSD,M3.5.0,M10.5.0/3'
USER='root'
uffik
 
Posts: 1
Joined: 15 Feb 2015, 00:44

Return to Курилка

Who is online

Users browsing this forum: No registered users and 1 guest

cron