Восстановление при самой неудачной прошивке Saturn(1186)

о железе плеера и о периферии

Re: Восстановление при самой неудачной прошивке Saturn(1186)

Postby Virtual » 22 Mar 2018, 18:35

2peetlr

битая rescue
шить бинарный буткод через tftp (сам бут в шапке есть)

или пытаться пройти экстрим ... заставить уйти в NOR rescue тоесть замыкание ног... (я это не советовал, просто некоторым оказалось проще чем tftp) далее прошивка NAND бута нормального (так же есть в шапке 0+1 )

PS на форуме очень хорошо работает поиск как по форуму так и в конкретной теме.
марсы: HDS7 (смотрелка AMP скин vrt уже без вариантов)
HDR12 AMP (обычно сервер с RAM 256 и возможностью подключить 2 SATA диска 2T+)
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.90 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6401
Joined: 01 Oct 2010, 17:17
Location: UFA RU

Re: Восстановление при самой неудачной прошивке Saturn(1186)

Postby peetlr » 22 Mar 2018, 19:32

(cut) overquoting! Пункт 4.19 Правил форума!

Еще раз спасибо, разобрался и поднял его, все работает!!!
peetlr
 
Posts: 2
Joined: 22 Mar 2018, 17:48

Re: Восстановление при самой неудачной прошивке Saturn(1186)

Postby leo555 » 24 Apr 2018, 20:03

прошу помощи!
лог
Attachments
log.zip
(1.33 KiB) Downloaded 70 times
ICONBIT XDS73D mk2 inext_hd1_222_r2.
leo555
 
Posts: 2
Joined: 24 Apr 2018, 19:39

Re: Восстановление при самой неудачной прошивке Saturn(1186)

Postby Virtual » 24 Apr 2018, 20:49

по всем признакам в флеш дырище, можно попробовать уйти в NOR загрузчик для возможности пройти квест с стиранием всей NAND, но это замыкание ног и я этого не советовал!, и очень далеко не факт что поможет, как бы не паяльник светит на горизонте.
марсы: HDS7 (смотрелка AMP скин vrt уже без вариантов)
HDR12 AMP (обычно сервер с RAM 256 и возможностью подключить 2 SATA диска 2T+)
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.90 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6401
Joined: 01 Oct 2010, 17:17
Location: UFA RU

Re: Восстановление при самой неудачной прошивке Saturn(1186)

Postby leo555 » 24 Apr 2018, 21:20

менять микрухи что ли?
ICONBIT XDS73D mk2 inext_hd1_222_r2.
leo555
 
Posts: 2
Joined: 24 Apr 2018, 19:39

Re: Восстановление при самой неудачной прошивке Saturn(1186)

Postby igor777 » 06 Jun 2018, 14:43

Приветствую всех на этом форуме. Не буду придумывать, что мне достался кирпич Egreat R6S, я его случайно таковым сделал. Подсунул ему не ту прошивку (случайно!!!!).
лог | +
Code: Select all
?hello.world
efghhhhhhhhhhhhhihhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhjk
 Jump!
NAND
1
c
d
e
2
decrypt Jump!5280 wait5280 wait4K&load bbt...load env to (addr 0xa0010000, size 64KB)...
page_start=0xec0 page_end=0x1800
load factory to (addr 0x80100000)...
load bbt...ping_no =0xff
pong_no =0xff
there is no data in ping ,pong buffer
current_factory_start=0x1800
current_factory_start + 0x400=0x1c00
tar end,not found
default_tv_system=
new default_tv_system=NTSC
[HDMI]: Set I2C Speed = 50 kHz
[HDMI]: Chk_HotPlug() TV is not connected.
[HDMI]: Read_EDID abort, HDMI cable plug off.
[HDMI]: TV is not connected.
1st for NTSC
NTSC logo
@@@@@@@@@@

REALTEK ROM Monitor, Revision 0000.0402.0060.
Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved.

For a list of available commands, type 'help'.

Compilation time /version=      Nov 13 2013  11:03:57  /0000.0402.0060
MAC address =                   f0.62.0d.02.8e.5d
Processor Company ID/options =  0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision =         0x93 / 0x85
Endianness =                    Little
Flash memory size =             512 MByte
SDRAM size =                    512 MByte
First free SDRAM address =      0x800c3000

STD_V3 supported...
Press 'ESC' to Monitor mode
STD ID block NO: 0xdc
STD identifier invalid, enter normal boot!!
Start STD function...
Start STD function...
Use LZO
Linux Kernel:
        FW Image from 0xa2020000, to 0x80100000, size=0x724188
[ERROR] MD no response
Audio FW:
        FW Image from 0xa2760000, to 0x81b00000, size=0x1cb830
Video FW:
        FW Image from 0xa2940000, to 0x81d80000, size=0x23e080
REG32(Audio_Mute_GPIO)=0x8
5280Go 5280Go
HDMI Raw Enable: MPG AC3 DTS AAC DDP MLP

SPDIF Raw Enable: MPG AC3 DTS AAC DDP MLP

Force 2ch Format: DTS DTSHD AC3 DDP MLP AAC WMAPRO

.o PowSerCP OU_n CLMKu90siK=c0
 013 sec.
go 0x80100000 mtdparts=rtk_nand:28160k,152320k(/),51200k(cache),266240k(/usr/local/etc),26368k rootfstype=squashfs root=31:01
defer 525p logo ,still black
Reset Ethernet Mac.


Address = 0x80100000
Linux version 2.6.34-VENUS (root@localhost.localdomain) (gcc version 4.3.6 20110218 (prerelease) (GCC) ) #186 PREEMPT Thu Dec 11 15:36:39 CST 2014

Realtek LINUX started...
Venus setting:
        ROSs have 4194304 bytes RAM.
        System CPU has 1 UART.
        System CPU uses internal timer interrupt.
        Bootloader version: 0000.0402.0060. This version string is of new format.
        The information of this board: Company ID:0x0    CPU ID: 0x4    Board ID: 0x402
        Ethernet Mac address: F0.62.0D.02.8E.5D
        Model Config length=0
Base year of RTC is 2010.
audio addr: 1b00000
Config serial console: console=ttyS0,115200n8r
bootconsole [early0] enabled
CPU revision is: 00019385 (MIPS 24Kc)
FPU revision is: 01739300
Determined physical RAM map:
 memory: 00100000 @ 00000000 (reserved)
 memory: 01a00000 @ 00100000 (usable)
 memory: 00500000 @ 01b00000 (reserved)
 memory: 0e000000 @ 02000000 (usable)
 memory: 00100000 @ 10000000 (reserved)
 memory: 07f00000 @ 10100000 (usable)
 memory: 00100000 @ 18000000 (reserved)
 memory: 05b00000 @ 18100000 (usable)
Wasting 8192 bytes for tracking 256 unused pages
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  DMA      0x00000000 -> 0x00002000
  Normal   0x00002000 -> 0x0001dc00
Movable zone start PFN for each node
  Node 0: 64512
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x0001dc00
zone DMA        size: 2000      realsize: 2000
zone Normal     size: dc00      realsize: dc00
zone Movable    size: e000      realsize: e000
zonelist: Movable Normal DMA
Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 121856
Kernel command line: mtdparts=rtk_nand:28160k,152320k(/),51200k(cache),266240k(/usr/local/etc),26368k rootfstype=squashfs root=31:01 console=ttyS0,115200n8r ip=192.168.0.9::192.168.0.254:255.0.0.0:::
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 32 bytes
Writing ErrCtl register=000641a4
Readback ErrCtl register=000641a4
Memory: 466952k/479232k available (4938k kernel code, 12280k reserved, 1281k data, 1092k init, 0k highmem)
NR_IRQS:8
Estimated CPU frequency: 756.05 MHz
Console: colour dummy device 80x25
Calibrating delay loop... 502.98 BogoMIPS (lpj=2514944)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
prom_flashsize = 0x20000000
Flash size is 0x2000000
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.22.1.
[PCI] CFG WARNING,Read config data ((null)) failed - timeout
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource MIPS-DMP
NET: Registered protocol family 2
Switched to NOHz mode on CPU #0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
input: venus_IR_input as /devices/virtual/input/input0




 *****************    se init module  *********************



se init module major number = 253




 *****************    md init module  *********************



md init module major number = 252
size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52...
1fser land] CmdBuf virt addr = 981f4000/b81f4000, phy addr=18
0 400

[Au[dMCPi] Ionfo , mFcp irdevmicwe dearteceted  ..V.
ersioinint_v]dso  su41cce1ssf1ull2
5
[Binary src compiled at] Mar 29 2012 13:54:22

rtktlb: Hello, Realtek TLB Mapper...
   AllocBP size: 688128 order: 8 offset: 0
        <<<DVR FREE AREA>>>
        0:      0
        1:      0
        2:      0
        3:      0
        4:      0
        5:      0
        6:      0
        7:      0
        8:      0
        9:      0
        10:     0
        11:     0
        12:     0
        13:     7
                Addr: 82000000, order: 13
                Addr: 84000000, order: 13
                Addr: 86000000, order: 13
                Addr: 88000000, order: 13
                Addr: 8a000000, order: 13
                Addr: 8c000000, order: 13
                Addr: 8e000000, order: 13
ashmem: initialized
squashfs: version 4.0 (2009/01/31) Phillip Lougher
<mtp module> insert mtpfs module OK
NTFS driver 2.1.29 [Flags: R/O].
YAFFS Driver Rev:329787 (2010-10-05)
YAFFS Driver is successfully installing.
msgmni has been set to 912
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
VenusFB: Framebuffer device driver for Realtek Media Processors
VenusFB: load successful (1280x720x32bbp)
Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
pmem: module loaded
Realtek NAND Flash Driver Rev:337905 (2010-10-18)
(X)Enable interrupt mechanism of NAND driver.
Get parameter from register...
[rtk_nand_init]Bootcode size 0xc00000
[rtk_nand_init]Factory parameter size 0x400000
[rtk_nand_init]Disable NFCP...
nand_base_rtk version:0824-2011
(X)NAND_POWEROFF_CARDREADER_WITH_MULTI_READ
(X)NAND_READ_SKIP_UPDATE_BBT
READ ID:0xad 0xdc 0x90 0x95 0x54 0xad
One H27U4G8F2D chip has 1 die(s) on board
nand part=H27U4G8F2D, id=addc9095, device_size=536870912, chip_size=536870912, num_chips=1, page_size=2048, isLastPage=1, eccBits=0
[rtk_nand_scan_bbt] have created bbt B1, just loads it !!
[dump_BBT] Nand BBT Content
[0] (0, 2355, 0, 4095)
[1] (0, 2963, 0, 4094)
[2] (0, 3079, 0, 4093)
[3] (0, 3231, 0, 4092)
[4] (0, 3403, 0, 4091)
[5] (0, 3783, 0, 4090)
[6] (0, 3819, 0, 4089)
[7] (0, 1779, 0, 4088)
[8] (0, 2866, 0, 4087)
[9] (0, 4087, 0, 4086)
[10] (0, 1824, 0, 4085)
[11] (0, 1825, 0, 4084)
[12] (0, 1896, 0, 4083)
[13] (0, 1899, 0, 4082)
[14] (0, 1904, 0, 4081)
[15] (0, 4081, 0, 4080)
[16] (0, 1810, 0, 4079)
[17] (0, 4079, 0, 4078)
[18] (0, 1811, 0, 4077)
[19] (0, 4077, 0, 4076)
5 cmdlinepart partitions found on MTD device rtk_nand
RTK: using dynamic nand partition
Creating 5 MTD partitions on "rtk_nand":
0x000000000000-0x000001b80000 : "Partition_000"
0x000001b80000-0x00000b040000 : "/"
0x00000b040000-0x00000e240000 : "cache"
0x00000e240000-0x00001e640000 : "/usr/local/etc"
0x00001e640000-0x000020000000 : "Partition_004"
0x000000000000-0x000020000000 : "disc"
[rtk_nand_init]Ecc bit select 0
Realtek Nand Flash Driver is successfully installing.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
this  Jupiter eth RX_OFFSET = 0x0
8139cplus: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
MAC address = 0xF0.62.0D.02.8E.5D
eth0: RTL-8139C+ at 0xb8016000, f0:62:0d:02:8e:5d, IRQ 2
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Initializing USB MTP/PTP driver...
usbcore: registered new interface driver usb-mtp
USB MTP/PTP support registered.
mice: PS/2 mouse device common for all mice
using rtc device, rtc-rtk_dmp_venus, for alarms
rtc-rtk_dmp_venus rtc-rtk_dmp_venus.0: rtc core: registered rtc-rtk_dmp_venus as rtc0
rtc: Real Time Clock of Realtek DMP's Venus series CPUs
i2c /dev entries driver
[I2C0] i2c speed changed to 100 KHz
I2C0 Bus Status Check.... OK
=========================
= VER : 2.1b
=========================
= PHY : 0
= MODEL: Saturn
= SPD : 100
= SAR : 0x024 (7 bits)
= TX FIFO DEPTH : 32
= RX FIFO DEPTH : 32
= FIFO THRESHOLD: 4
= BUS JAM RECORVER 3: ON
= NON STOP WRITE : ON
= GPIO RW SUPPORT : ON
=========================
[I2C1] i2c speed changed to 100 KHz
I2C1 Bus Status Check.... OK
=========================
= VER : 2.1b
=========================
= PHY : 1
= MODEL: Saturn
= SPD : 100
= SAR : 0x024 (7 bits)
= TX FIFO DEPTH : 32
= RX FIFO DEPTH : 32
= FIFO THRESHOLD: 4
= BUS JAM RECORVER 3: ON
= NON STOP WRITE : ON
= GPIO RW SUPPORT : ON
=========================
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
device-mapper: uevent: version 1.0.3
cp_hotplug
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
usbcore: registered new interface driver snd-usb-audio
Enter snd_card_mars_pcm 3337
Enter snd_card_mars_pcm 3341
Enter snd_card_mars_pcm 3347
ALSA device list:
  #0: Mars 1
oprofile: using mips/24K performance monitoring.
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
rtk_enable_kcpu : Code Size = 3744 , Data Size = 1856
Saturn_Param_PWM_Irda_Key.protocol = 0
Saturn_Param_PWM_Irda_Key.power_key = 0xff00fc03
Saturn_Param_PWM_Irda_Key.eject_key = 0xe817fc03
Saturn_Param_PWM_GPIO_Key.power_key_number = -1
Saturn_Param_PWM_GPIO_Key.eject_key_number = -1
_sloeptext = 0x805d1cd4 , _esleeptext = 0x805d2b74
_sleepdata = 0x80712960 , _esleepdata = 0x807130a0
Realtek Saturn Power Management, (c) 2011 Realtek Semiconductor Corp.
cp_open
alloc rings cp->rxdesc_buf =0xb9634000 , cp->ring_dma=0x19634000
init_hw

 eth0: Set multicast.
saturn 10/100
init_hw finished

 eth0: Set multicast.

 eth0: Set multicast.

 eth0: Set multicast.
ADDRCONF(NETDEV_UP): eth0: link is not ready
IP-Config: Complete:
     device=eth0, addr=192.168.0.9, mask=255.0.0.0, gw=192.168.0.254,
     host=192.168.0.9, domain=, nis-domain=(none),
     bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
dvr malloc order: 13
+++ ALLOC index: 0 order: 13
 zone: 8091d000 page: 8091d000(82000000) count: 8192
 start remap DVR zone 82000000(8091d000) 8192...
total migrated:  done: 0         fail: 0

 ((( pmem_setup 2000000 @ 2000000 )))
pmem: 1 init
Freeing unused kernel memory: 1092k freed
Venus rtc can work.
init: Succeed to build connection interface: 6
init: cannot open '/initlogo.rle'
yaffs: dev is 32505859 name is "mtdblock3" rw
yaffs: passed flags ""
yaffs: dev is 32505858 name is "mtdblock2" rw
yaffs: passed flags ""
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
# --------- beginning of /dev/log/main
I/DEBUG   (  305): debuggerd: Oct 30 2014 13:28:16
I/Netd    (  304): Netd 1.0 starting
--------- beginning of /dev/log/system
D/Vold    (  303): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Vold    (  303): Volume ums state changing -1 (Initializing) -> 0 (No-Media)
D/Vold    (  303): Volume sata state changing -1 (Initializing) -> 0 (No-Media)
D/Vold    (  303): Volume sdcard2 state changing -1 (Initializing) -> 0 (No-Media)
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram0
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram1
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram0
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram1
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram2
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram2
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram3
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram3
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram4
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram4
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram5
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram5
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram6
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram6
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram7
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram7
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram8
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram8
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram9
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram9
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram10
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram10
continus.
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram11
dcMal 90400000 vir2Phy:10400000 3686400
system buffer:90400000,0,10400000
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram11
continus.
dcMal 98400000 vir2Phy:18400000 3686400
system buffer:98400000,0,18400000
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram12
continus.
dcMal 9d800000 vir2Phy:1d800000 3686400
system buffer:9d800000,0,1d800000
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram12
continus.
dcMal 90800000 vir2Phy:10800000 3686400
system buffer:90800000,0,10800000
fun=DC_RT_Init line=224
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram13
fun=DC_RT_Init line=262
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram13
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram14
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram14
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram15
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop0
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop1
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop2
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop3
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/ram15
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop0
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop1
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop2
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop3
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop4
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop4
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop5
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop5
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop6
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop6
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop7
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/block/loop7
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/mtd/mtd0/mtdblock0
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/mtd/mtd0/mtdblock0
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/mtd/mtd1/mtdblock1
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/mtd/mtd1/mtdblock1
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/mtd/mtd2/mtdblock2
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/mtd/mtd2/mtdblock2
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/mtd/mtd3/mtdblock3
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/mtd/mtd3/mtdblock3
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/mtd/mtd4/mtdblock4
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/mtd/mtd4/mtdblock4
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/mtd/mtddisc/mtdblockdisc
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/mtd/mtddisc/mtdblockdisc
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
W/Vold    (  303): No UMS switch available
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/module/pvrsrvkm
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
E/NetlinkEvent(  303): NetlinkEvent::FindParam(): Parameter 'DEVTYPE' not found
E/NetlinkEvent(  303): NetlinkEvent::FindParam(): Parameter 'DEVNAME' not found
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/module/pvrsrvkm
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/bus/platform/drivers/pvrsrvkm
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
E/NetlinkEvent(  303): NetlinkEvent::FindParam(): Parameter 'DEVTYPE' not found
E/NetlinkEvent(  303): NetlinkEvent::FindParam(): Parameter 'DEVNAME' not found
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/bus/platform/drivers/pvrsrvkm
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/platform/pvrsrvkm
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
E/NetlinkEvent(  303): NetlinkEvent::FindParam(): Parameter 'DEVTYPE' not found
E/NetlinkEvent(  303): NetlinkEvent::FindParam(): Parameter 'DEVNAME' not found
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/platform/pvrsrvkm
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/class/pvr
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
E/NetlinkEvent(  303): NetlinkEvent::FindParam(): Parameter 'DEVTYPE' not found
E/NetlinkEvent(  303): NetlinkEvent::FindParam(): Parameter 'DEVNAME' not found
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/class/pvr
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/pvr/pvrsrvkm
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
E/NetlinkEvent(  303): NetlinkEvent::FindParam(): Parameter 'DEVTYPE' not found
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/pvr/pvrsrvkm
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/module/dcrt
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
read pll_reg b8000010 : 0
E/NetlinkEvent(  303): NetlinkEvent::FindParam(): Parameter 'DEVTYPE' not found
xxxx b8000010 : fff
fun=SGXInitialise line=285
fun=SGXInitialise line=295
fun=SGXInitialise line=297
fun=SGXInitialise line=338
E/NetlinkEvent(  303): NetlinkEvent::FindParam(): Parameter 'DEVNAME' not found
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/module/dcrt
init: untracked pid 384 exited
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/class/dcnohw
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
E/NetlinkEvent(  303): NetlinkEvent::FindParam(): Parameter 'DEVTYPE' not found
E/NetlinkEvent(  303): NetlinkEvent::FindParam(): Parameter 'DEVNAME' not found
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/class/dcnohw
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/NetlinkListener(  303): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/dcnohw/dcnohw
I/NetlinkEvent(  303): Stan:NetlinkEvent: string=add
E/NetlinkEvent(  303): NetlinkEvent::FindParam(): Parameter 'DEVTYPE' not found
I/NetlinkListener(  304): NetlinkListener, onDataAvailable, mBuffer=add@/devices/virtual/dcnohw/dcnohw
init: untracked pid 383 exited
I/NetlinkEvent(  304): Stan:NetlinkEvent: string=add
I/        (  307): ServiceManager: 0x82cd0
E/ALSALib (  307): external/alsa-lib/src/control/control.c:902:(snd_ctl_open_noupdate) Invalid CTL AndroidOut
snd_mars_volume_info
snd_mars_volume_get
snd_mars_volume_get
snd_mars_volume_get
snd_mars_volume_get
snd_mars_volume_info
snd_mars_volume_get
snd_mars_volume_get
W/AudioHardwareALSA(  307): Unable to attach mixer to device AndroidOut: No such file or directory
snd_mars_volume_info
E/ALSALib (  307): external/alsa-lib/src/control/control.c:902:(snd_ctl_open_noupdate) Invalid CTL AndroidIn
snd_mars_volume_get
snd_mars_volume_get
snd_mars_volume_get
snd_mars_volume_get
snd_mars_volume_info
snd_mars_volume_get
snd_mars_volume_get
W/AudioHardwareALSA(  307): Unable to attach mixer to device AndroidIn: No such file or directory
I/CameraService(  307): CameraService started: pid=307
D/AudioHardwareALSA(  307): openOutputStream called for devices: 0x00000002
D/ALSAModule(  307): open called for devices 00000002 in mode 0...
snd_card_mars_playback_open 3166
Enter snd_realtek_hw_init 2322
Enter snd_realtek_hw_init 2324
[ALSA] AO ready .....


прошу помощи в восстановлении!
igor777
 
Posts: 1
Joined: 06 Jun 2018, 14:33

Re: Восстановление при самой неудачной прошивке Saturn(1186)

Postby Virtual » 06 Jun 2018, 20:23

рекомендую пройти процедуру с унибутом и стиранием всего NAND. у вас там "решето" в флеш, хоть и не в критических областях.
марсы: HDS7 (смотрелка AMP скин vrt уже без вариантов)
HDR12 AMP (обычно сервер с RAM 256 и возможностью подключить 2 SATA диска 2T+)
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.90 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6401
Joined: 01 Oct 2010, 17:17
Location: UFA RU

Previous

Return to Hardware

Who is online

Users browsing this forum: Google [Bot] and 1 guest